Thanks Mike and Mike. The question was asked on a fitters forum I started
some years ago. I asked for more info but still have not received a
response. The question had me scratching my head . Not our typical riser
material.

I thought I was drilling 80 one time until we discovered a stainless steel
bearing embedded in the pipe wall was eating up the hole saws.


On Thu, Sep 19, 2013 at 2:02 PM, Mike Cabral <[email protected]>wrote:

> Can you use a pressure switch to detect a drop in pressure rather than a
> vain type flow switch? If there is a jockey pump and therefore a steady
> system pressure you should be able to detect the pressure drop from static
> pressure to residual pressure.
>
> Potter makes a pressure switch with a pneumatic retard device that could
> also compensate for some short term pressure variations.
>
> Mike C
>
> Sent from my iPhone
>
> On Sep 19, 2013, at 10:07 AM, Mike Henke <[email protected]> wrote:
>
> > Thomas,
> >
> > I do not believe that anyone makes a flowswitch for schedule 80 pipe
> that is Listed for use on fire sprinkler systems. Can you replace a spool
> piece with schedule 40 pipe?
> >
> > Before anyone suggests, no you cannot just trim the paddle of a standard
> flowswitch.
> >
> > What type of facility is it that is using sched 80?
> >
> > Regards,
> >
> > mike
> >
> > Mike Henke CET
> > Sprinkler Product Manager
> > Potter Electric Signal Co.
> > www.pottersignal.com
> > 314-595-6740 Direct
> >
> >
> > -----Original Message-----
> > From: [email protected] [mailto:
> [email protected]] On Behalf Of Thomas Watt
> > Sent: Thursday, September 19, 2013 9:24 AM
> > To: [email protected]
> > Subject: Flow switch for 6" sch80
> >
> > Can't seem to find it. Anyone?
> > _______________________________________________
> > Sprinklerforum mailing list
> > [email protected]
> >
> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
> > _______________________________________________
> > Sprinklerforum mailing list
> > [email protected]
> >
> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
> _______________________________________________
> Sprinklerforum mailing list
> [email protected]
>
> http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
>
_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

Reply via email to