Thanks Mark. I also have a friend who is an FPE and I'm going to have him look things over before I submit.
Thank You, Bob Knight, CET III 208-318-3057 www.Firebyknight.com -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of [email protected] Sent: Friday, April 04, 2014 9:59 PM To: [email protected] Subject: Re: Deluge System Pull Station Hi Bob, Depending on the hazard and area being protected, they are located at the primary and one alternate exit from the area/building. That is just from memory, I don't have the standard. Mark at Aero Sent from my iPhone > On Apr 4, 2014, at 6:05 PM, "Bob" <[email protected]> wrote: > > I've been reading for a couple of hours and my eyes are about crossed. > Other than at the riser, how do you determine if and when a manual > pull station is required for a deluge system. I've read a good bit of > literature and code, but I haven't seen anything that clarifies this. > Is it based on distance of travel, length of pipe, etc... or is this > something that spec would determine? > > Thank You, > > Bob Knight, CET III > 208-318-3057 > www.Firebyknight.com > > > > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkl > er.org > _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
