Greetings to All From New Mexico:
 
I have a Client (hotel) with a wet-pipe fire sprinkler system,  two floors, 
all POZ-LOK pipe and 'fittings'. Transitioning from Hampton Inn to  
Marriott format. Can anyone offer input/ comments about keeping the  POZ-LOK in 
place while, at same time, is anyone aware of where said pipe and  fittings 
might be purchased or is it all "gone"?? Some revisions to the system  will be 
required for new walls/ceilings, etc., thus, Owner needs to be able to  
procure parts.
 
Any and all responses will be most welcome. Obviously, we are  trying to 
avoid removing the entire system and 'starting over'.
 
Gracias from Nuevo Mejico!!
 
Jerry
[email protected]_ (mailto:[email protected]) 
 
Jerry D. Watts, MSFPE
President & Co-Founder
ACCENT FIRE ENGINEERING INT'L. Ltd.
Santa Fe, New Mexico USA
(800) 503.1961 nationwide
 
 
 
 
In a message dated 5/13/2016 2:27:47 P.M. Mountain Daylight Time,  
[email protected] writes:

 
Tim, 
There are some NFPA13 R pump  manufacturers that have a fire pump skid and 
tank assemblies for NFPA 13-R  water supplies.  
Regards 
 
Davidson  Associates 
Fire  Protection Engineering   P. O. Box 4002 
Code  Consultants   Greenville, DE  19807 
(302) 994-9500 
Fax (302)  994-3414 
CONFIDENTIALITY 
This  report and any attachments are confidential and also may be  
privileged. 
If  you are not the named recipient, or have otherwise received this report 
in  error, please destroy the report, notify the sender immediately, and do 
not  disclose its contents to any other person, use them for any purpose, 
or store  or copy them in any medium. 
Thank  you for your cooperation.
 
 
From: Sprinklerforum  
[mailto:[email protected]] On Behalf Of  Tim Stone
Sent: Friday, May 13, 2016 10:16 AM
To:  [email protected]
Subject: Polyethylene  Tanks

Are there any requirements in NFPA 22 not allowing the use  of Polyethylene 
water storage tanks for residential or commercial sprinkler  systems? These 
tanks are installed above ground usually in Basements.   
The local State agency is getting ready to adopt the 2013  edition of NFPA 
22 and I am being told NFPA 22 only permits Fiberglass. I  don’t see where 
Polyethylene is excluded. 
Thoughts please. 
Regards, 
G. Tim  Stone 
G.  Tim Stone Consulting, LLC 
NICET  Level III Engineering Technician 
Fire  Protection Sprinkler Design 
and  Consulting Services 
117 Old Stage Rd. - Essex Jct., VT. 05452 
CELL:  (802) 373-0638   TEL: (802) 434-2968   Fax: (802)  434-4343 
[email protected]_ (mailto:[email protected])  



_______________________________________________
Sprinklerforum  mailing  list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

_______________________________________________
Sprinklerforum mailing list
[email protected]
http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org

Reply via email to