Justin, Gloves on a power threading machine, and anything with rotating parts is very dangerous.
Know that is you use gloves on a power threader that they are at your own risk and against the manufactures recommendations. A ridgid 300 power machine's O&M Manual actually states around page 3 and 4 that gloves must not be worn during operation of the power threader. You can easily loose a finger, snap a wrist if caught right. If you would like a copy of their O&M Manual I can send it to you. We just went through this with a job where they were requiring gloves to be worn at all times. I hope this helps. Michael Goodis Estimator, Project Manager IL#000635 NICET#135586 Key Fire Protection Enterprises LLC 3200 Mike Padgett HWY Augusta, GA 30906 Office- (706)790-3473 Cell- (706) 220-8822 Fax: (706) 738-2119 -----Original Message----- From: Sprinklerforum [mailto:[email protected]] On Behalf Of Justin Stewart Sent: Friday, July 22, 2016 9:12 AM To: [email protected] Subject: Gloves for cutting machine I know this is random however, what's the best gloves for threading machines? Thanks, Justin Stewart _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
