Jeff, if you look into it Oshawa does not say yes or no on it, they state it's not recommended on machinery with rotating parts, but that's as far as they go. It's in the Ridgid 300 O&M manual where it is stated they are not allowed.
Mike Goodis Sent from my iPhone > On Jul 22, 2016, at 6:48 PM, Jeff Bridges <[email protected]> wrote: > > Only gloves I allow my fitters to wear while using most machinery is the > thin Nitrate surgical gloves. They at least provide some skin protection > from cutting oils. > Cotton gloves, mechanic style work gloves and even the no-cut safety gloves > are all no-no's and I believe specifically prohibited by OSHA regulations > > Jeff Bridges > > > > -----Original Message----- > From: Sprinklerforum [mailto:[email protected]] > On Behalf Of Justin Stewart > Sent: Friday, July 22, 2016 6:12 AM > To: [email protected] > Subject: Gloves for cutting machine > > I know this is random however, what's the best gloves for threading > machines? > > Thanks, > Justin Stewart > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org > > _______________________________________________ > Sprinklerforum mailing list > [email protected] > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org _______________________________________________ Sprinklerforum mailing list [email protected] http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
