Is this system installed or still in design? Travis Mack, SET MFP Design, LLC "Follow" us on Facebook: https://www.facebook.com/pages/MFP-Design-LLC/92218417692 Send large files to MFP Design via: https://www.hightail.com/u/MFPDesign
Sent from my iPhone > On Feb 16, 2017, at 6:19 PM, Jerry Van Kolken <jvankol...@mfpc.us> wrote: > > I have a Fire Pump feeding a HiEX foam and Wet System. The start-up churn on > the pump will cause the pressure to go over 175 psi so we are putting a > pressure reducing valve on the wet feed side of the discharge. > > I’m not sure how I balance this system anymore due to the PRV. The valve will > be set at 165 discharge. > > Any advice on how to proceed. > > Thanks > > Jerry Van Kolken > Millennium Fire Protection Corp. > 2950 San Luis Rey Rd. > Oceanside, CA 92058 > (760) 722-2722 FX 722-2730 > > _______________________________________________ > Sprinklerforum mailing list > Sprinklerforum@lists.firesprinkler.org > http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org
_______________________________________________ Sprinklerforum mailing list Sprinklerforum@lists.firesprinkler.org http://lists.firesprinkler.org/listinfo.cgi/sprinklerforum-firesprinkler.org