schup011 wrote: > Hi guys, > > I have problems with streaming radio from an own satellite radio > streaming server (don't have wired internet here), which is a separate > Raspberry Pi with a VDR installation on it. > > My squeeze setup, here acting as streaming client, is a piCorePlayer > with integrated LMS and Jivelite on 7 inch screen. > > The radio stations are set as favourites in LMS, pointing to the VDR > streaming server, e.g. 192.168.0.100:3000/ES/1052 > > Usually, this works really well: the display goes (quickly) from > "Connection being established" over > "Buffering" > to > "Now Playing". > Everything fine, I am listening radio. > > Sometimes, however, when I change the radio channel by choosing another > favourite, the satellite radio server accepts the HTTP connection, but > does not send any audio because it cannot tune to the transponder (bad > signal). In this case, the piCorePlayer display gets stuck at > "Connection being established". I cannot even stop the connection in > Jivelite. > > The problem now is that the LMS does not close the HTTP connection > because it still waits for an audio stream. And because of this, I > cannot tune to another radio station. LMS requests a new HTTP > connection, but does not close the old one, and the server is stuck at > the old one and does not accept a new one. I can only proceed if I > "motivate" the server to close this HTTP connection by itself, but that > is not feasible for normal use, as it is headless. > > I would have expected that LMS closes the HTTP connection after a > certain timeout period, but it doesn't. I know that there is this > timeout setting, but it doesn't seem to have any effect in this case. > > I have tested another streaming client instead of LMS / squeezelite: VLC > Player on Windows 10. With it, it works properly. VLC closes the HTTP > connection at latest when I request a new HTTP stream. > > Does anyone have a clue whether this LMS behaviour (obviously different > from that of VLC) is desired? Why does it not close the HTTP after a > certain timeout? Should I activate special logging to track that? > > Thanks for your help!
I think you will need to post LMS version no etc VB2.4[/B] STORAGE *QNAP TS419P (NFS) [B]Living Room* - Joggler & SB3 -> Onkyo TS606 -> Celestion F20s *Office* - Pi3+Sreen -> Sony TAFE320 -> Celestion F10s / Pi2+DAC & SB3 -> Onkyo CRN755 -> Wharfedale Modus Cubes *Dining Room* -> SB Boom *Kitchen* -> UE Radio (upgraded to SB Radio) *Bedroom (Bedside)* - Pi2+DAC ->ToppingTP21 ->AKG Headphones *Bedroom (TV)* - SB Touch ->Sherwood AVR ->Mordaunt Short M10s Everything controlled by iPeng ------------------------------------------------------------------------ d6jg's Profile: http://forums.slimdevices.com/member.php?userid=44051 View this thread: http://forums.slimdevices.com/showthread.php?t=112774 _______________________________________________ Squeezecenter mailing list Squeezecenter@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/squeezecenter