Hi, I tried doing this in my network. We run about 150mb and 8 squid cache box's. Found using transparency and a load balanced route map works better.
-- Joe On Tue, 11 Nov 2003, John El-Rassi wrote: > Hi all, > > I am trying to implement squid+wccp along with a cisco 3550. i was able to compile > the visolve wccp2 patch for squid and the kernel. and got them running okay. > > However, when i run Squid in wccpv1 (and the cisco 3550) the cisco only redirects > traffic destined for itself. (i have an open case with cisco about this). > > So i tried implementing wccpv2. to my dismay the cisco 3550 does not support wccpv2 > with GRE packet redirection. it must use Layer 2 redirection. so when i run squid > with the wccpv2 i get the following errors on the cisco 3550 (off course i change > both configs on cisco and squid wccp2_router and ip wccp version 2) > > 17:19:43: WCCP-EVNT:wccp_update_assignment_status: enter > 17:19:43: WCCP-EVNT:wccp_update_assignment_status: exit > 17:19:43: WCCP-EVNT:S00: Here_I_Am packet from 142.46.145.4 w/bad fwd method > 00000001, was offered 00000002 > 17:19:43: WCCP-EVNT:S00: Here_I_Am packet from 142.46.145.4 with incompatible > capabilites > > Questions > > 1. i was wondering if there has been anywork done to support wccpv2+Layer 2 > (instead of GRE) > > 2. what is causing the cisco (in wccpv1) to only redirect traffic when destined to > itself. > > anyhelp would be much appreciated. > > thank you, > > John > > [EMAIL PROTECTED] > > > >
