Spam detection software, running on the system "master.squid-cache.org",
has identified this incoming email as possible spam. The original
message has been attached to this so you can view it or label
similar future email. If you have any questions, see
@@CONTACT_ADDRESS@@ for details.
Content preview: Hi, Yes, we can redirect the ports to squid through our
firewall
rules. Check below lines to redirect the ports. We have some different
methods
to do. 1. In first Method: First, we need to machine that squid will be
running
on, You do not need iptables or any special kernel options on this machine,
just squid. You will, however, need the 'http_accel' options as described
above. [...]
Content analysis details: (5.9 points, 5.0 required)
pts rule name description
---- ---------------------- --------------------------------------------------
0.0 URIBL_BLOCKED ADMINISTRATOR NOTICE: The query to URIBL was
blocked.
See
http://wiki.apache.org/spamassassin/DnsBlocklists#dnsbl-block
for more information.
[URIs: squid-cache.org]
3.6 RCVD_IN_PBL RBL: Received via a relay in Spamhaus PBL
[182.73.50.82 listed in zen.spamhaus.org]
0.7 RCVD_IN_XBL RBL: Received via a relay in Spamhaus XBL
1.6 RCVD_IN_BRBL_LASTEXT RBL: No description available.
[182.73.50.82 listed in bb.barracudacentral.org]
0.0 HTML_MESSAGE BODY: HTML included in message
0.0 UNPARSEABLE_RELAY Informational: message has unparseable relay lines
The original message was not completely plain text, and may be unsafe to
open with some email clients; in particular, it may contain a virus,
or confirm that your address can receive spam. If you wish to view
it, it may be safer to save it to a file and open it with an editor.
--- Begin Message ---
Hi,
Yes, we can redirect the ports to squid through our firewall rules.
Check below lines to redirect the ports.
We have some different methods to do.
1. In first Method:
First, we need to machine that squid will be running on, You do not
need iptables or any special kernel options on this machine, just squid.
You will, however, need the 'http_accel' options as described above.
You'll want to use the following set of commands on iptables-box:
* iptables -t nat -A PREROUTING -i eth0 -s ! *squid-box* -p tcp
--dport 80 -j DNAT --to *squid-box*:3128
* iptables -t nat -A POSTROUTING -o eth0 -s *local-network* -d
*squid-box* -j SNAT --to *iptables-box*
* iptables -A FORWARD -s *local-network* -d *squid-box* -i eth0 -o
eth0 -p tcp --dport 3128 -j ACCEPT
2. And have another method:
* iptables -t mangle -A PREROUTING -j ACCEPT -p tcp --dport 80 -s
*squid-box*
* iptables -t mangle -A PREROUTING -j MARK --set-mark 3 -p tcp --dport 80
* ip rule add fwmark 3 table 2
* ip route add default via *squid-box* dev eth1 table 2
(OR)
iptables -A PREROUTING -t nat -i eth0 -p tcp --dport 80 -j REDIRECT
--to-port 3128
Regards,
Visolve Squid
On 9/30/2014 10:11 PM, hadi wrote:
It's possible to redirect all ports to squid ? thru iptables ?
For example port 25 smtp,143 imap, etc...
Can squid handle that. In transparent mode.
_______________________________________________
squid-users mailing list
squid-users@lists.squid-cache.org
http://lists.squid-cache.org/listinfo/squid-users
--- End Message ---
_______________________________________________
squid-users mailing list
squid-users@lists.squid-cache.org
http://lists.squid-cache.org/listinfo/squid-users
