So this has been REALLY good! The tl;dr: ssl-bumping is pretty easy even with intercept, ssl-bumping with access control is a little more difficult...jump to the config to skip the chit chat.
My goal has always been to a content filter based on url regex. This works just fine for http traffic, but is much more difficult for https traffic just for the case of you may or may not know the host you're going to, depending on the site/app. I'll be real honest here....I'm only doing this to protect/filter the traffic of two kids, on laptops, iPhone, and Android phone, so it's a mixed bag of content and, since it's just the two of them in a home environment, I get to play around and see what works and what doesn't. Below is a close as I can get transparent intercept ssl-bump with content filtering with using a list of domains/urls with both http and https. I still have to use a list of broken sites, which are large netblocks (17.0.0.0/8..Apple anyone?) because some of these I just can't seem to get host/domain information during the ssl handshake. As I discovered after attempting to put this into "production", I have not been able to emulate using wget or curl an https session that doesn't have any SNI information, so that threw me for a loop. TextNow is a great example (I'm including a packet capture of this in this post). There's no host information in the client hello....there's no host information in the server hello.....buried deep in the certificate ONLY is the "commonName=.*textnow.me"...that's it. This dashed my hopes of using an url_regex for access control with all https sessions. I have "%ssl::>cert_subject" in my logging, and I never did see this log in any of my tests...and I tested a BUNCH of different peek/stare/splice/bump cominations..so I don't think squid is actually seeing this from the certificate. Another challenge is getting http url_regex filtering to work with https filtering. My method of filtering means not having an "http_access allow localnet", which directly conflicted with also trying to filter https. The solution was to add an acl for port 443, then http_access to just allow it, as our filtering was going to happen for https further down. I know there's a fair amount of people who just want to plop in some config files, run a few commands, and be up and running. The below configuration has two additional files it references, http_url.txt, which is an a list of domains/urls (\.apple\.com for example), and the aptly named broken, which is a IP list (17.0.0.0/8). The broken list should be (semi) trusted and are sites that we just can't get SNI or hostname information from. If you've created a single cert/key pair from the Squid documentation, you won't need the key= line in your https_port directive. If you've followed along in my posts, you already have the configure line from my previous posts. Change the commands/config to fir where your squid config and ssl_db are. So after configuring, make sure you: sudo /opt/libexec/ssl_crtd -c -s /opt/var/ssl_db sudo chown -R nobody /opt/var/ssl_db/ As I believe in a lot of logging, and actually looking at said logging, below is what you can expect to see in your logs (mine logs to syslog, again, change this if you log to a different file): Allowed http to .apple.com in http_url.txt: May 31 17:03:48 gateway (squid-1): 192.168.1.100 - - [31/May/2015:17:03:48 -0600] "GET http://init.ess.apple.com/WebObjects/VCInit.woa/wa/getBag? HTTP/1.1" - - 200 5243 TCP_MISS:ORIGINAL_DST - Denied http to symcb.com not in http_url.txt May 31 17:03:48 gateway (squid-1): 192.168.1.100 - - [31/May/2015:17:03:48 -0600] "GET http://sd.symcb.com/sd.crt HTTP/1.1" - - 403 3618 TCP_DENIED:HIER_NONE - Spliced https IP in broken.txt (google block 216.58.192.0/19) May 31 17:04:34 gateway (squid-1): 192.168.1.101 - - [31/May/2015:17:04:34 -0600] "CONNECT 216.58.216.138:443 HTTP/1.1" - - 200 568 TCP_TUNNEL:ORIGINAL_DST peek Spliced https IP in broken.txt that we got SNI or bumped site in http_url.txt look exactly the same May 31 17:09:45 gateway (squid-1): 192.168.1.100 - - [31/May/2015:17:09:45 -0600] "CONNECT 23.222.157.21:443 HTTP/1.1" init.itunes.apple.com - 200 30314 TCP_TUNNEL:ORIGINAL_DST peek The only drag with the configuration is you won't see when an https session is terminated when the IP/url is not in the broken.txt, or the http_url.txt: [17:20:53 jlay@analysis:~$] wget -d --ca-certificate=/etc/ssl/certs/sslsplit.crt https://www.yahoo.com Setting --ca-certificate (cacertificate) to /etc/ssl/certs/sslsplit.crt DEBUG output created by Wget 1.16.1 on linux-gnu. URI encoding = ‘UTF-8’ --2015-05-31 17:20:59-- https://www.yahoo.com/ Resolving www.yahoo.com (www.yahoo.com)... 206.190.36.45, 206.190.36.105, 2001:4998:c:a06::2:4008 Caching www.yahoo.com => 206.190.36.45 206.190.36.105 2001:4998:c:a06::2:4008 Connecting to www.yahoo.com (www.yahoo.com)|206.190.36.45|:443... connected. Created socket 3. Releasing 0x00007fdf67eecdd0 (new refcount 1). Initiating SSL handshake. SSL handshake failed. Closed fd 3 Unable to establish SSL connection. May 31 17:20:59 gateway (squid-1): 192.168.1.6 - - [31/May/2015:17:20:59 -0600] "CONNECT 206.190.36.45:443 HTTP/1.1" www.yahoo.com - 200 0 TAG_NONE:ORIGINAL_DST peek Full config below: #################################### acl localnet src 192.168.1.0/24 acl SSL_ports port 443 acl Safe_ports port 80 acl Safe_ports port 443 acl CONNECT method CONNECT acl allowed_http_sites url_regex "/opt/etc/squid/http_url.txt" acl allow_https port 443 acl broken dst "/opt/etc/squid/broken.txt" http_access deny !Safe_ports http_access deny CONNECT !SSL_Ports http_access allow allow_https http_access allow allowed_http_sites http_access deny !allowed_http_sites http_access deny all acl step1 at_step SslBump1 acl step2 at_step SslBump2 acl step3 at_step SslBump3 ssl_bump peek step1 broken ssl_bump peek step2 broken ssl_bump splice broken ssl_bump peek step1 all ssl_bump peek step2 all acl allowed_https_sites ssl::server_name_regex "/opt/etc/squid/http_url.txt" ssl_bump bump allowed_https_sites ssl_bump terminate !allowed_https_sites sslproxy_cert_error allow all sslproxy_capath /etc/ssl/certs sslproxy_flags DONT_VERIFY_PEER sslproxy_options ALL sslcrtd_program /opt/libexec/ssl_crtd -s /opt/var/ssl_db -M 4MB sslcrtd_children 5 http_port 3128 intercept https_port 3129 intercept ssl-bump cert=/opt/etc/squid/certs/sslsplit_ca_cert.pem cafile=/opt/etc/squid/certs/sslsplit_ca_cert.pem key=/opt/etc/squid/certs/sslsplit_ca_key.pem generate-host-certificates=on dynamic_cert_mem_cache_size=4MB sslflags=NO_SESSION_REUSE logformat mine %>a %[ui %[un [%tl] "%rm %ru HTTP/%rv" %ssl::>sni % ssl::>cert_subject %>Hs %<st %Ss:%Sh %ssl::bump_mode access_log syslog:daemon.info mine refresh_pattern -i (cgi-bin|\?) 0 0% 0 refresh_pattern . 0 20% 4320 coredump_dir /opt/var ############################## Thanks all for being patient while I continued to post my learning and all my mistakes. If there's anything that I've missed, or if there's another method for trying to accomplish what I've tried to do I'm all eyes. James P.S. Things I'd love to see in Squid some day: acl's being AND'd (http_access allow allowed_sites AND localnet) Full on separate http_access, https_access directives
textnow.pcapng
Description: Binary data
_______________________________________________ squid-users mailing list squid-users@lists.squid-cache.org http://lists.squid-cache.org/listinfo/squid-users
