On 07/24/2015 03:25 AM, Jens Offenbach wrote:
I have made a quick test of Squid 3.3.8 on Ubuntu 15.04 and I get the same
problem: 100 % CPU usage, 500 KB/sec download rate.
Gesendet: Freitag, 24. Juli 2015 um 07:54 Uhr
Von: "Jens Offenbach" <wolle5...@gmx.de>
An: "Marcus Kool" <marcus.k...@urlfilterdb.com>, "Eliezer Croitoru" <elie...@ngtech.co.il>,
"Amos Jeffries" <squ...@treenet.co.nz>, squid-users@lists.squid-cache.org
Betreff: Re: [squid-users] Squid3: 100 % CPU load during object caching
It is not easy for me, but I have tested Squid 3.3.8 from the Ubuntu packaging on a
"real" physical infrastructure. I get the same results on the physical machine
(1x Intel(R) Xeon(R) CPU E3-1225 V2 @ 3.20GHz, 32 GB RAM, 1 TB disk) where Squid is
running: 100 % CPU usage, 500 KB/sec download rate. All machines are idle and we have 1
GBit ethernet.
The strace log from the physical test scenario can be found here, but I think it does not
differ from the "virtual" test scenario:
http://wikisend.com/download/293856/squid.strace2
@Marcus:
Have you verified that the file does not fit into memory and gets cached on
disk? On which OS is Squid running? What are your build options of Squid (squid
-v)? Is it possible that the issue is not part of 3.4.12? Do we have a
regression?
I screwed up earlier since the maximum_object_size was too low for the test
with a 1 GB file and did a new test.
The system has 64 GB memory and for sure the entire file is in the file system
cache. The disk system is HW RAID-1 with 1 GB cache.
The OS is Linux 3.10, CentOS 7 latest patches.
New test:
test system: 1 CPU with 4 cores/8 threads @ 3.7 GHz, 64 GB memory, AUFS, 1 Gbit
pipe, 500 mbit guaranteed
with Squid 3.4.12 :
1st download starts with 90 MB/sec and halfway drops to 30 MB/sec. My guess is
that the file system cache got stressed and slowed things down.
2nd cached download with 190 MB/sec sustained and 120% CPU time.
With Squid 3.5.6 :
1st download starts with 90 MB/sec sustained and 80% CPU time.
2nd cached download with 190 MB/sec sustained and 120% CPU time.
As a comparison, I did "dd if=test of=test2 bs=4k" which uses 100% CPU time and
has a throughput of 1200 MB/sec.
With bs=16k the throughput is 1300 MB/sec and with bs=64k the throughput is
1400 MB/sec.
relevant parameters :
read_ahead_gap 64 KB
cache_mem 256 MB
maximum_object_size_in_memory 8 MB
maximum_object_size 8000 MB
cache_dir aufs /local/squid34/cache 10000 32 256
cache_swap_low 92
cache_swap_high 93
# also ICAP daemon and URL rewriter configured
debug_options ALL,1 93,3 61,9
configure options:
'--prefix=/local/squid35' '--disable-ipv6' '--enable-fd-config' '--with-maxfd=3200' '--enable-async-io=64' '--enable-storeio=aufs' '--with-pthreads' '--enable-removal-policies=lru'
'--disable-auto-locale' '--enable-default-err-language=English' '--enable-err-languages=Dutch English Portuguese' '--with-openssl' '--enable-ssl' '--enable-ssl-crtd'
'--enable-cachemgr-hostname=localhost' '--enable-cache-digests' '--enable-follow-x-forwarded-for' '--enable-xmalloc-statistics' '--disable-hostname-checks' '--enable-epoll' '--enable-icap-client'
'--enable-useragent-log' '--enable-referer-log' '--enable-stacktraces' '--enable-underscores' '--disable-icmp' '--mandir=/usr/local/share' 'CC=gcc' 'CFLAGS=-g -O2 -Wall -march=native' 'CXXFLAGS=-g -O2
-Wall -march=native' --enable-ltdl-convenience
As you can see the cache_mem is small, If Amos finds it useful, I can do
another test with a larger cache_mem.
Jens, since all your tests have a drop to 500 KB/sec I think the cause is
somewhere is the configuration (Squid and/or OS).
Marcus
@Amos, Eliezer
Is someone able to reproduce the disk caching effect?
Regards,
Jens
Gesendet: Donnerstag, 23. Juli 2015 um 20:08 Uhr
Von: "Marcus Kool" <marcus.k...@urlfilterdb.com>
An: "Jens Offenbach" <wolle5...@gmx.de>, "Amos Jeffries" <squ...@treenet.co.nz>, "Eliezer
Croitoru" <elie...@ngtech.co.il>, squid-users@lists.squid-cache.org
Betreff: Re: Aw: Re: [squid-users] Squid3: 100 % CPU load during object caching
The strace output shows this loop:
Squid reads 16K-1 bytes from FD 13 webserver
Squid writes 4 times 4K to FD 17 /var/cache/squid3/00/00/00000000
Squid writes 4 times 4K to FD 12 browser
But this loop does not explain the 100% CPU usage...
Does Squid do a buffer reshuffle when it reads 16K-1 and writes 16K ?
I did the download test with Squid 3.4.12 AUFS on an idle system with a 500
mbit connection and 1 CPU with 4 cores @ 3.7 GHz.
The first download used 35% of 1 CPU core with a steady download speed of 62
MB/sec.
The second (cached) download used 50% of 1 CPU core with a steady download
speed of 87 MB/sec.
I never looked at Squid CPU usage and do not know what is reasonable but it
feels high.
With respect to the 100% CPU issue of Jens, one factor is that Squid runs in a
virtual machine.
Squid in a virtual machine cannot be compared with a wget test since Squid
allocates a lot of memory that the host must manage.
This is a possible explanation for the fact that you see the performance going
down and up.
Can you do the same test on the host (i.e. not inside a VM).
Marcus
On 07/23/2015 10:39 AM, Jens Offenbach wrote:
I have attached strace to Squid and waited until the download rate has
decreased to 500 KB/sec.
I used "cache_dir aufs /var/cache/squid3 88894 16 256 max-size=10737418240".
Here is the download link:
http://w1.wikisend.com/node-fs/download/6a004a416f65b4cdf7f8eff4ff961199/squid.strace[http://w1.wikisend.com/node-fs/download/6a004a416f65b4cdf7f8eff4ff961199/squid.strace]
I hope it can help you.
*Gesendet:* Donnerstag, 23. Juli 2015 um 13:29 Uhr
*Von:* "Marcus Kool" <marcus.k...@urlfilterdb.com>
*An:* "Jens Offenbach" <wolle5...@gmx.de>, "Eliezer Croitoru" <elie...@ngtech.co.il>,
"Amos Jeffries" <squ...@treenet.co.nz>, squid-users@lists.squid-cache.org
*Betreff:* Re: [squid-users] Squid3: 100 % CPU load during object caching
I am not sure if it is relevant, maybe it is:
I am developing an ICAP daemon and after the ICAP server sends a "100 continue"
Squid sends the object to the ICAP server in small chunks of varying sizes:
4095, 5813, 1448, 4344, 1448, 1448, 2896, etc.
Note that the interval of receiving the chunks is 1/1000th of a second.
It seems that Squid forwards the object to the ICAP server every time it
receives
one or a few TCP packets.
I have a suspicion that in the scenario of 100% CPU, large #write calls and low
throughput a similar thing is happening:
Squid physically stores a small part of the object many times, i.e. every time
one or a few TCP packets arrive.
Amos, is there a debug setting that can confirm/reject this suspicion?
Marcus
On 07/23/2015 04:25 AM, Jens Offenbach wrote:
A test with ROCK "cache_dir rock /var/cache/squid3 51200" gives very confusing
results.
I cleared the cache:
rm -rf /var/cache/squid3/*
squid -z
squid
http_proxy=http://139.2.57.120:3128/[http://139.2.57.120:3128/][http://139.2.57.120:3128/[http://139.2.57.120:3128/]]
wget http://test-server/freesurfer-Linux-centos6_x86_64-stable-pub-v5.3.0.tar
The download starts with 10 MB/sec and stays constant for 1 minutes, then it
drops gradually to 1 MB/sec and stays there for some time. After 5 minutes the
download rate returns back to 10 MB/sec
very quickly and drops again step-by-step to 1 MB/sec. After 5-6 minutes the
download rates rises again to 10 MB/sec and drops again gradually to 1 MB/sec.
During caching progress, we have 100 % CPU usage and a disk IO that is
corresponds with the download rate.
For further investigations I give you my build properties:
squid -v
Squid Cache: Version 3.5.6
Service Name: squid
configure options: '--build=x86_64-linux-gnu' '--prefix=/usr'
'--includedir=/include' '--mandir=/share/man' '--infodir=/share/info'
'--sysconfdir=/etc' '--localstatedir=/var'
'--libexecdir=/lib/squid3' '--srcdir=.' '--disable-maintainer-mode'
'--disable-dependency-tracking' '--disable-silent-rules'
'--datadir=/usr/share/squid3' '--sysconfdir=/etc/squid3'
'--mandir=/usr/share/man' '--enable-inline' '--enable-async-io=8'
'--enable-storeio=ufs,aufs,diskd,rock' '--enable-removal-policies=lru,heap'
'--enable-delay-pools' '--enable-cache-digests'
'--enable-underscores' '--enable-icap-client' '--enable-follow-x-forwarded-for'
'--enable-auth-basic=DB,fake,getpwnam,LDAP,NCSA,NIS,PAM,POP3,RADIUS,SASL,SMB'
'--enable-auth-digest=file,LDAP'
'--enable-auth-negotiate=kerberos,wrapper' '--enable-auth-ntlm=fake,smb_lm'
'--enable-external-acl-helpers=file_userip,kerberos_ldap_group,LDAP_group,session,SQL_session,unix_group,wbinfo_group'
'--enable-url-rewrite-helpers=fake' '--enable-eui' '--enable-e
s
i' '--enable-icmp' '--enable-zph-qos' '--enable-ecap' '--disable-translation'
'--with-swapdir=/var/cache/squid3' '--with-logdir=/var/log/squid3'
'--with-pidfile=/var/run/squid3.pid'
'--with-filedescriptors=65536' '--with-large-files' '--with-default-user=proxy'
'--enable-linux-netfilter' 'build_alias=x86_64-linux-gnu' 'CFLAGS=-g -O2 -fPIE
-fstack-protector
--param=ssp-buffer-size=4 -Wformat -Werror=format-security -Wall'
'LDFLAGS=-Wl,-Bsymbolic-functions -fPIE -pie -Wl,-z,relro -Wl,-z,now'
'CPPFLAGS=-D_FORTIFY_SOURCE=2' 'CXXFLAGS=-g -O2 -fPIE
-fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security'
Gesendet: Mittwoch, 22. Juli 2015 um 21:47 Uhr
Von: "Eliezer Croitoru" <elie...@ngtech.co.il>
An: squid-users@lists.squid-cache.org
Betreff: Re: [squid-users] Squid3: 100 % CPU load during object caching
On 22/07/2015 21:59, Eliezer Croitoru wrote:
Hey Jens,
I have tested the issue with LARGE ROCK and not AUFS or UFS.
Using squid or not my connection to the server is about 2.5 MBps (20Mbps).
Squid is sitting on an intel atom with SSD drive and on a HIT case the
download speed is more then doubled to 4.5 MBps(36Mbps).
I have not tried it with AUFS yet.
And I must admit that AUFS beats rock cache with speed.
I have tried rock with basic "cache_dir rock /var/spool/squid 8000" vs
"cache_dir aufs /var/spool/squid 8000 16 256" and the aufs cache HIT
results more then doubles 3 the speed rock gave with default settings.
So about 15MBps which is 120Mbps.
I do not seem to feel what Jens feels but the 100% CPU might be because
of spinning disk hangs while reading the file from disk.
Amos, I remember that there were some suggestions how to tune large rock.
Any hints?
I can test it and make it a suggestion for big files.
Eliezer
_______________________________________________
squid-users mailing list
squid-users@lists.squid-cache.org
http://lists.squid-cache.org/listinfo/squid-users[http://lists.squid-cache.org/listinfo/squid-users][http://lists.squid-cache.org/listinfo/squid-users[http://lists.squid-cache.org/listinfo/squid-users]]
_______________________________________________
squid-users mailing list
squid-users@lists.squid-cache.org
http://lists.squid-cache.org/listinfo/squid-users[http://lists.squid-cache.org/listinfo/squid-users][http://lists.squid-cache.org/listinfo/squid-users[http://lists.squid-cache.org/listinfo/squid-users]]
_______________________________________________
squid-users mailing list
squid-users@lists.squid-cache.org
http://lists.squid-cache.org/listinfo/squid-users[http://lists.squid-cache.org/listinfo/squid-users]
_______________________________________________
squid-users mailing list
squid-users@lists.squid-cache.org
http://lists.squid-cache.org/listinfo/squid-users
_______________________________________________
squid-users mailing list
squid-users@lists.squid-cache.org
http://lists.squid-cache.org/listinfo/squid-users
