Ubuntu 14.04 Squid 3.5.5
Hi - I've successfully installed, configured and run squid 3.5.5 w/o a problem using: sudo apt-get install squid I want to filter by mac address though, so I purged that install and re-built squid with the *--enable-arp-acl* flag. I installed using make install. This is when the problems begin. I've summarized that in a separate thread: http://lists.squid-cache.org/pipermail/squid-users/2015-August/005232.html I wonder if there's a way to simply *avoid* all those problems. A couple of questions: 1. My build configuration is below. After building and installing, squid ended up here: */usr/local/squid/sbin*. I think that's the same place *sudo apt-get install squid *puts it right? 2. Given I had no problems with *sudo apt-get install squid*, is the best practice to install squid using that method and arrange for my builds to install squid to a different location and simply copy it over? Thanks, Deiter ./configure --prefix=/usr --localstatedir=/var --libexecdir=${prefix}/lib/squid3 --srcdir=. --datadir=${prefix}/share/squid3 --sysconfdir=/etc/squid3 --with-default-user=proxy --with-logdir=/var/log --with-pidfile=/var/run/squid.pid --enable-arp-acl
_______________________________________________ squid-users mailing list squid-users@lists.squid-cache.org http://lists.squid-cache.org/listinfo/squid-users
