Hi, Thanks for the response. What I want to achieve is to prevent 2 users enter with the same username simultaneously.
<--> User 1 enters the proxy, browses some pages. <--> User 2 tries to enter, and he receives a reject. <--> User1 stops browsing pages. <--> User2 tries to enter, but because the TTL is not expired for the first user, he is rejected again. <--> After the TTL, User2 is able to connect. This scenario is working with the -s strict parameter that is applied to maxconn. But I want to achieve the same with the usernames, not the IP addresses as the user distinguisher. You mentioned maxuser parameter. Can you give an example of its' usage? Thanks a lot, Murat -----Original Message----- From: squid-users [mailto:squid-users-boun...@lists.squid-cache.org] On Behalf Of Matus UHLAR - fantomas Sent: Friday, January 15, 2016 3:13 AM To: squid-users@lists.squid-cache.org Subject: Re: [squid-users] Maxconn Parameter behaviour with NAT On 14.01.16 16:58, Murat Balkan wrote: >I want to limit the users with the Maxconn parameters. But the users >are NATed behind a public IP address. Is squid just looking at the IP >address or can it also use the username to figure out if it should >apply the maxconn? maxconn uses clients' addresses as described. That means, when more users are NATted behind one IP, squid can't differ between them. you can use maxuser for their usernames as they are autenticated to squid. -- Matus UHLAR - fantomas, uh...@fantomas.sk ; http://www.fantomas.sk/ Warning: I wish NOT to receive e-mail advertising to this address. Varovanie: na tuto adresu chcem NEDOSTAVAT akukolvek reklamnu postu. 42.7 percent of all statistics are made up on the spot. _______________________________________________ squid-users mailing list squid-users@lists.squid-cache.org http://lists.squid-cache.org/listinfo/squid-users _______________________________________________ squid-users mailing list squid-users@lists.squid-cache.org http://lists.squid-cache.org/listinfo/squid-users
