On 24/02/18 06:29, erdosain9 wrote: > Hi to all. > I dont know why i have this bad values. My network is woking fine. How i can > do to fix this. I think is a high value. > > HTTP/1.1 200 OK > Server: squid/3.5.27 > Mime-Version: 1.0 > Date: Fri, 23 Feb 2018 17:16:25 GMT > Content-Type: text/plain;charset=utf-8 > Expires: Fri, 23 Feb 2018 17:16:25 GMT > Last-Modified: Fri, 23 Feb 2018 17:16:25 GMT > X-Cache: MISS from proxy.mydomain.lan > X-Cache-Lookup: MISS from proxy.mydomain.lan:3128 > Via: 1.1 proxy.mydomain.lan (squid/3.5.27) > Connection: close > > Negotiate Authenticator Statistics: > program: /lib64/squid/negotiate_kerberos_auth > number active: 50 of 50 (0 shutting down) > requests sent: 4106 > replies received: 4105 > queue length: 0 > avg service time: 82 msec
The above "avg service time" is not bad for a system as complicated as Kerberos. Note that this is significantly less than the outstanding requests listed below in the report. That is a sign that a very large number of the lookups are performed very, very fast. In other words; what you see in the report is _only_ the odd ones that do go slow enough to show up there. With maybe, at most, a few of the faster ones that happened by chance to be partially done at the instant the report was generated. Be aware that it is normal for a helper which has not been used much to require time to refresh its internal state in order to process a request. Avoiding that problem is why you see the clear pattern of #Requests going to one helper, with a second getting most of the remainder and so on. Squid intentionally biases lookups towards the most recently used/updated helper. Also, the longer delay times visible being for the later helpers down the list is another side effect of that problem. As Yuri cryptically asked, did this come to your attention due to customer complaints? or just while observing the reports? if it is not causing observable issues to the clients I would not worry. If you want to tune the helpers better than default, you can maybe further reduce that state refresh by configuring the helper with explicit details about what backed server to be contacting. A lot of the delays are caused by sequences of DNS lookups and parsing + processing the machine KeyTab files. The debug (-d) option of the helper itself can assist you with identifying which of its internal processes is going slowest. Just try not to drown in the flood of data from those very, very fast ones. > > ID # FD PID # Requests # Replies Flags Time > Offset > Request > 21 18 57259 1183 1182 B R 0.293 > 0 (none) > 22 22 57260 652 652 0.164 > 0 (none) ... > > > ###Kerberos Auth with ActiveDirectory### > auth_param negotiate program /lib64/squid/negotiate_kerberos_auth -s > HTTP/proxy.empddh....@empddh.lan > auth_param negotiate children 50 startup=0 idle=1 > auth_param basic credentialsttl 2 hours > auth_param negotiate keep_alive on > _______________________________________________ squid-users mailing list squid-users@lists.squid-cache.org http://lists.squid-cache.org/listinfo/squid-users