Hai Alex, Ahh.. You wanted with ssl, sorry missed that. Here you go.
apt-get source squid cd squid-4.6/debian/ Edit rules, after the line, --with-gnutls Add these: --enable-ssl --enable-ssl-crtd --with-openssl Save. Edit changelog Change the version 4.6-1 to 4.6-1ssl Save Install libgnutls28-dev openssl cd ../.. apt-get source squid3 -b And resulting in squid 4.6 with ssl. This is the most simple way to compile squid and get it working. Its not the best way, for that setup a builder environment. This works! Try it. Greetz, Louis > -----Oorspronkelijk bericht----- > Van: squid-users > [mailto:squid-users-boun...@lists.squid-cache.org] Namens > Alex Gutiérrez Martínez > Verzonden: vrijdag 1 maart 2019 14:13 > Aan: squid-users@lists.squid-cache.org > Onderwerp: [squid-users] compiling squid 4 > > Hello again community, I still have problems compiling squid > 4. This is > what i did this time: > > > Basic support: > > sudo apt install logrotate acl attr autoconf bison nettle-dev > build-essential libacl1-dev libaio-dev libattr1-dev libblkid-dev > libbsd-dev libcap2-dev libcppunit-dev libldap2-dev pkg-config > libxml2-dev libdb-dev libgnutls28-dev openssl devscripts fakeroot > libdbi-perl libssl1.0-dev libcppunit-dev libecap3-dev libkrb5-dev > comerr-dev libnetfilter-conntrack-dev libpam0g-dev > libsasl2-dev rj bzip2 > xz-utils cabextract cpio file lzma lhasa lzop rpm2cpio gzip > nomarch pax > lzop rar unrar unzip zoo unace razor pyzor tnef ripole zip > p7zip-full mc > multitail ccze libcppunit-dev libsasl2-dev libxml2-dev libkrb5-dev > libdb-dev libnetfilter-conntrack-dev libexpat1-dev libcap2-dev > libldap2-dev libpam0g-dev libgnutls28-dev libssl-dev libdbi-perl > libecap3 libecap3-dev libntlm0-dev libkf5kiontlm5 samba-dev ldap-utils > > sudo groupadd -g 13 proxy > sudo mkdir -p /var/spool/squid > sudo mkdir -p /var/log/squid > sudo useradd --system -g proxy -u 13 -d /var/spool/squid -M -s > /usr/sbin/nologin proxy > sudo chown proxy:proxy /var/spool/squid > sudo chown proxy:proxy /var/log/squid > > cd /opt > wget -c http://www.squid-cache.org/Versions/v4/squid-4.6.tar.xz > tar xfv squid-4.6.tar.xz > > Configuramos las opciones básicas que podamos necesitar: > > ./configure --srcdir=. --prefix=/usr --localstatedir=/var/lib/squid > --libexecdir=/usr/lib/squid --datadir=/usr/share/squid > --sysconfdir=/etc/squid --with-default-user=proxy > --with-logdir=/var/log/squid --with-open-ssl=/etc/ssl/openssl.cnf > --with-openssl --enable-ssl --enable-ssl-crtd > --build=x86_64-linux-gnu > --with-pidfile=/var/run/squid.pid --enable-removal-policies=lru,heap > --enable-delay-pools --enable-cache-digests --enable-icap-client > --enable-ecap --enable-follow-x-forwarded-for --with-large-files > --with-filedescriptors=65536 > --enable-auth-basic=DB,fake,getpwnam,LDAP,NCSA,NIS,PAM,POP3,RA DIUS,SASL,SMB > --enable-auth-digest=file,LDAP > --enable-auth-negotiate=kerberos,wrapper > --enable-auth-ntlm=fake --enable-linux-netfilter > --with-swapdir=/var/spool/squid --enable-useragent-log --enable-htpc > --infodir=/usr/share/info --mandir=/usr/share/man > --includedir=/usr/include --disable-maintainer-mode > --disable-dependency-tracking --disable-silent-rules --enable-inline > --enable-async-io --enable-storeio=ufs,aufs,diskd,rock --enable-eui > --enable-esi --enable-icmp --enable-zph-qos > --enable-external-acl-helpers=file_userip,kerberos_ldap_group, time_quota,LDAP_group,session,SQL_session,unix_group,wbinfo_group > --enable-url-rewrite-helpers=fake --enable-translation --enable-epoll > --enable-snmp --enable-wccpv2 --with-aio --with-pthreads > > Compiling with 4 cores: > > make -j 4 > > Installing: > > sudo make install > > create initi script: > > sudo nano /etc/init.d/squid > > initi content: > > ############################################################## > ######################################## > ############################################################## > ######################################## > ############################################################## > ######################################## > # squid4 Startup script for the SQUID HTTP proxy-cache. > # > # Version: @(#)squid4 init script 1.0 20-Feb-2019 > lesli...@nauta.cu > ############################################################## > ########## > > ### BEGIN INIT INFO > # Provides: squid > # Required-Start: $network $remote_fs $syslog > # Required-Stop: $network $remote_fs $syslog > # Should-Start: $named > # Should-Stop: $named > # Default-Start: 2 3 4 5 > # Default-Stop: 0 1 6 > # Short-Description: Squid HTTP Proxy version 4.x > ### END INIT INFO > > NAME=squid > DESC="Squid HTTP Proxy 4.x" > DAEMON=/usr/sbin/squid > PIDFILE=/var/run/$NAME.pid > CONFIG=/etc/squid/squid.conf > SQUID_ARGS="-YC -f $CONFIG" > > [ ! -f /etc/default/squid ] || . /etc/default/squid > > . /lib/lsb/init-functions > > PATH=/bin:/usr/bin:/sbin:/usr/sbin > > [ -x $DAEMON ] || exit 0 > > ulimit -n 65535 > > find_cache_dir () { > w=" " # space tab > res=`sed -ne ' > s/^'$1'['"$w"']\+[^'"$w"']\+['"$w"']\+\([^'"$w"']\+\).*$/\1/p; > t end; > d; > :end q' < $CONFIG` > [ -n "$res" ] || res=$2 > echo "$res" > } > > find_cache_type () { > w=" " # space tab > res=`sed -ne ' > s/^'$1'['"$w"']\+\([^'"$w"']\+\).*$/\1/p; > t end; > d; > :end q' < $CONFIG` > [ -n "$res" ] || res=$2 > echo "$res" > } > > start () { > cache_dir=`find_cache_dir cache_dir` > cache_type=`find_cache_type cache_dir` > > # > # Create spool dirs if they don't exist. > # > if [ "$cache_type" = "coss" -a -d "$cache_dir" -a ! -f > "$cache_dir/stripe" ] || [ "$cache_type" != "coss" -a -d > "$cache_dir" -a > ! -d "$cache_dir/00" ] > then > log_warning_msg "Creating $DESC cache structure" > $DAEMON -z -f $CONFIG > fi > > umask 027 > ulimit -n 65535 > cd $cache_dir > start-stop-daemon --quiet --start \ > --pidfile $PIDFILE \ > --exec $DAEMON -- $SQUID_ARGS < /dev/null > return $? > } > > stop () { > PID=`cat $PIDFILE 2>/dev/null` > start-stop-daemon --stop --quiet --pidfile $PIDFILE > --exec $DAEMON > # > # Now we have to wait until squid has _really_ stopped. > # > sleep 2 > if test -n "$PID" && kill -0 $PID 2>/dev/null > then > log_action_begin_msg " Waiting" > cnt=0 > while kill -0 $PID 2>/dev/null > do > cnt=`expr $cnt + 1` > if [ $cnt -gt 24 ] > then > log_action_end_msg 1 > return 1 > fi > sleep 5 > log_action_cont_msg "" > done > log_action_end_msg 0 > return 0 > else > return 0 > fi > } > > case "$1" in > start) > log_daemon_msg "Starting $DESC" "$NAME" > if start ; then > log_end_msg $? > else > log_end_msg $? > fi > ;; > stop) > log_daemon_msg "Stopping $DESC" "$NAME" > if stop ; then > log_end_msg $? > else > log_end_msg $? > fi > ;; > reload|force-reload) > log_action_msg "Reloading $DESC configuration files" > start-stop-daemon --stop --signal 1 \ > --pidfile $PIDFILE --quiet --exec $DAEMON > log_action_end_msg 0 > ;; > restart) > log_daemon_msg "Restarting $DESC" "$NAME" > stop > if start ; then > log_end_msg $? > else > log_end_msg $? > fi > ;; > status) > status_of_proc -p $PIDFILE $DAEMON $NAME && exit 0 || exit 3 > ;; > *) > echo "Usage: /etc/init.d/$NAME > {start|stop|reload|force-reload|restart|status}" > exit 3 > ;; > esac > > exit 0 > ############################################################## > ######################################## > ############################################################## > ######################################## > ############################################################## > ######################################## > > set permissions: > > cambiar permisos al archivo > sudo chmod +x /etc/init.d/squid > > activar servicio de squid > sudo update-rc.d squid defaults > > > > After all this when i start the service this is the response > from the system > > > systemctl status squid.service > â squid.service > Loaded: loaded (/etc/init.d/squid; generated) > Active: failed (Result: exit-code) since Thu 2019-02-28 15:52:15 > CST; 5s ago > Docs: man:systemd-sysv-generator(8) > Process: 18732 ExecStart=/etc/init.d/squid start (code=exited, > status=203/EXEC) > > feb 28 15:52:15 sq4 systemd[1]: Starting squid.service... > feb 28 15:52:15 sq4 systemd[18732]: squid.service: Failed to execute > command: Exec format error > feb 28 15:52:15 sq4 systemd[18732]: squid.service: Failed at > step EXEC > spawning /etc/init.d/squid: Exec format error > feb 28 15:52:15 sq4 systemd[1]: squid.service: Control > process exited, > code=exited status=203 > feb 28 15:52:15 sq4 systemd[1]: squid.service: Failed with result > 'exit-code'. > feb 28 15:52:15 sq4 systemd[1]: Failed to start squid.service. > > > Im using Ubuntu 18.04.2, thanks in advance. > > > PD: Thanks for your answer Rafael Akchurin but unforntunately the > article that you suggest won´t work for me. > > -- > Saludos Cordiales > > Lic. Alex Gutiérrez Martínez > > Tel. +53 7 2710327 > > > > _______________________________________________ > squid-users mailing list > squid-users@lists.squid-cache.org > http://lists.squid-cache.org/listinfo/squid-users > _______________________________________________ squid-users mailing list squid-users@lists.squid-cache.org http://lists.squid-cache.org/listinfo/squid-users