Dear Amos, I have upgraded to squid as below [root@linproxy software]# squid -vSquid Cache: Version 4.6Service Name: squid but the site www.esri.comis still not working .. just says page cannot be displayed the access.log show the below---------------------------------- 576385816.111 189 172.16.2.175 TCP_REFRESH_MODIFIED/301 377 GET http://www.esri.com/ - HIER_DIRECT/23.37.177.22 -1576385816.112 15875 172.16.2.175 TCP_TUNNEL/200 5547 CONNECT outlook.office365.com:443 - HIER_DIRECT/40.101.137.50 -1576385816.157 42 172.16.2.175 TCP_TUNNEL/200 46 CONNECT www.esri.com:443 - HIER_DIRECT/23.37.177.22 -1576385816.203 42 172.16.2.175 TCP_TUNNEL/200 46 CONNECT www.esri.com:443 - HIER_DIRECT/23.37.177.22 -1576385816.249 43 172.16.2.175 TCP_TUNNEL/200 46 CONNECT www.esri.com:443 - HIER_DIRECT/23.37.177.22 -1576385816.274 21 172.16.2.175 TCP_TUNNEL/200 39 CONNECT www.esri.com:443 - HIER_DIRECT/23.37.177.22 ----------------------------------- but hotmail and other sites working fine anyway I can try to debug more to find the issue apprecite your help and advice
On Tuesday, December 10, 2019, 07:18:07 PM GMT+3, simon ben <guy200...@yahoo.com> wrote: Dear Amos, Thanks for the quick reply. Yes its an old version as I use to install using yum.I will upgrade as you said and check it out thanks once again Regards simon On Tuesday, December 10, 2019, 10:57:47 AM GMT+3, Amos Jeffries <squ...@treenet.co.nz> wrote: On 10/12/19 5:52 am, simon ben wrote: > Dear All, > > > > I am using Squid version 3.5.2 on Centos 7 64 bit and its working fine > with no issue but recently got a complain from one user saying that the > below site Is not opening.. just says page cannot be displayed > That would be one issue. Likely many others you are just not noticing. Please upgrade. v3.5.2 is over 5 years old and obsolete. Current Squid release is v4.9. > > 1575869460.673 6034 172.16.2.175 TCP_TUNNEL/200 0 CONNECT > my.esri.com:443 <http://my.esri.com:443> - HIER_DIRECT/34.210.189.55 > <http://34.210.189.55> - > > 1575869461.235 559 172.16.2.175 TCP_TUNNEL/200 0 CONNECT > my.esri.com:443 <http://my.esri.com:443> - HIER_DIRECT/34.210.189.55 > <http://34.210.189.55> - > > 1575869461.801 562 172.16.2.175 TCP_TUNNEL/200 0 CONNECT > my.esri.com:443 <http://my.esri.com:443> - HIER_DIRECT/34.210.189.55 > <http://34.210.189.55> - > > 1575869462.096 291 172.16.2.175 TCP_TUNNEL/200 0 CONNECT > my.esri.com:443 <http://my.esri.com:443> - HIER_DIRECT/34.210.189.55 > <http://34.210.189.55> – > > > > > > I tried to google around and found that the the ip4 prefrence has to > enabled for DNS so I did the below in squid config > No it does not. Your proxy is already connecting the tunnel to that sites IPv4 address. Amos _______________________________________________ squid-users mailing list squid-users@lists.squid-cache.org http://lists.squid-cache.org/listinfo/squid-users
_______________________________________________ squid-users mailing list squid-users@lists.squid-cache.org http://lists.squid-cache.org/listinfo/squid-users