Hi,
On 5/29/24 5:29 PM, Alex Rousskov wrote:
On 2024-05-29 05:01, Rik Theys wrote:
acl allowed_clients src "/etc/squid/allowed_clients"
acl allowed_domains dstdomain "/etc/squid/allowed_domains"
http_access allow allowed_clients allowed_domains
http_access allow allowed_clients CONNECT
http_access deny all
Please note that the second http_access rule in the above
configuration allows CONNECT tunnels to prohibited domains (i.e.
domains that do not match allowed_domains). Consider restricting your
"allow...CONNECT" rule to step1. For example:
http_access allow allowed_clients step1 CONNECT
Thanks, I've updated my configuration.
squid doesn't seem to validate that the IP address we're connecting
to is valid for the specified name in the SNI header?
That observation matches my reading of Squid Host header forgery
detection code which says "we do not yet handle CONNECT tunnels well,
so ignore for them". To validate that theory, use "debug_options
ALL,3" and look for "SECURITY ALERT: Host header forgery detected"
messages in cache.log.
I've enabled this debug option, but I never see the security alert in
the logs. Maybe it was introduced in more recent versions? I'm currently
using Squid 5.5 that comes with Rocky Linux 9.4.
Looking at the logs, I'm also having problems determining where each
ssl-bump step is started.
Please note that in many environments forgery detection does not work
well (for cases where it is performed) due to clients and Squid seeing
different sets of IP addresses for the same host name. There are
numerous complains about that in squid-users archives.
For example, if I add "wordpress.org" to my allowed_domains list, the
following request is allowed:
curl -v https://wordpress.org --connect-to wordpress.org:443:8.8.8.8:443
8.8.8.8 is not a valid IP address for wordpress.org. This could be
used to bypass the restrictions.
Agreed.
Is there an option in squid to make it perform a forward DNS lookup
for the domain from the SNI information from step1
FYI: SNI comes from step2. step1 looks at TCP/IP client info.
to validate that the IP address we're trying to connect to is
actually valid for that host? In the example above, a DNS lookup for
wordpress.org would return 198.143.164.252 as the IP address. This is
not the IP address we're trying to connect to, so squid should block
the request.
AFAICT, there is no built-in support for that in current Squid code.
One could enhance Squid or write an external ACL to perform that kind
of validation. See above for details/caveats.
Similar question for the server certificate: I've configured the
'ssl_bump peek step2 https_domains' line so squid can peek at the
server certificate.
Peeking at the server certificates happens at step3. In many modern
use cases, server certificates are encrypted, so a _peeking_ Squid
cannot see them. To validate, Squid has to bump the tunnel (supported
today but problematic for other reasons) or be enhanced to use
out-of-band validation tricks (that come with their own set of problems).
I guess that explains why if I add "%ssl::<cert_subject" to my logformat
for the access log, the field is always "-"?
Is there a way to configure squid to validate that the server
certificate is valid for the host specified in the SNI header?
IIRC, that validation happens automatically in modern Squid versions
when Squid receives an (unencrypted) server certificate.
Do you happen to known which version of Squid introduced that check?
Regards,
Rik
_______________________________________________
squid-users mailing list
squid-users@lists.squid-cache.org
https://lists.squid-cache.org/listinfo/squid-users
