Hi, I am interested in knowing what is needed for making radius authentication to work with squid.
Also is it possible to generate both start of session and end of session records using squid using any authentication mechanism. I am looking forward to do accounting based on number of hours of usage. Thanks in advance, Tushar -----Original Message----- From: Sander Winkel [mailto:[EMAIL PROTECTED] Sent: Thursday, March 13, 2003 3:09 PM To: Lieven Marchand Cc: [EMAIL PROTECTED] Subject: Re: [squid-users] How to do? authentication and ip-range Thanks, it works! Sander Winkel ----- Original Message ----- From: "Lieven Marchand" <[EMAIL PROTECTED]> To: "Sander Winkel" <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Thursday, March 13, 2003 10:02 AM Subject: Re: [squid-users] How to do? authentication and ip-range > "Sander Winkel" <[EMAIL PROTECTED]> writes: > > > I want to give only access to computers from an specified ip-range and the > > users at that ip-range must be validated with radius authentication. > > The radius authentication works well, but I don't know how to define that > > only the specified IP-range have access to the server. > > Oh yes, I know that it could as specified below: > > > > acl clients src 192.168.0.0/255.255.255.0 > > http_access allow clients > > > > But when I put this before: > > > > http_access allow password > > > > All the users within that range have access to the cache without > > authentication. > > > > I think that's not so difficult to get this work, but I don't see the > > solution at the moment. > > I hope you can help me. > > acl's can be combined so you do > > http_access allow clients password > > -- > There is only one war, and it's not the rich against the poor, > the blacks against the whites, the Federation against the Borg, > or the Democrats versus the Republicans. It's those of us who > aren't complete idiots against those of us who are.