Hi, Thanks ever so much for the Info, but I need to change the way this works because The access to the other proxy is actually obtained through another gateway, and Of course you can not have more than 1 default gateway on a box.
So what I would like to do is to setup Squid Box 1 to redirect any traffic for companydomain.com to Squid Box 2. Squid Box 2 will then proxy the normal way. Thanks ever so much Chris -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Henrik Nordstrom Sent: 01 February 2003 11:29 To: Chris & Val Bamber Cc: [EMAIL PROTECTED] Subject: Re: [squid-users] Redirecting Squid traffic to another Proxy. How ? Something like this should work: cache_peer proxy-jp.your.domain parent jpproxyportnumber 0 no-query acl intranet dstdomain intranet.your.domain cache_peer_access allow proxy-jp.your.domain never_direct allow intranet You need to replace proxy-jp.your.domain, jpproxyportnumber, intranet.your.domain with values suitable for your setup. Regards Henrik Chris & Val Bamber wrote: > > Hi, > > We presently have a Squid 2.5 server and are happy with it. We are now > needing To make our company intranet (based in Japan) available on the > network. This is > Not available through the normal T1 line, but a frame relay link. > > What I would like to do is to have Squid automatically forward > requests specific for Our intranet site to the Proxy box based in > Japan rather than going through the T1. > > We did it in a test environment using a ISA server and Squid Proxy > together. Everyone Pointed to the ISA, and a set of rules were > configured on the ISA to direct the traffic, > Up streaming server I believe ISA called them. > > I am hoping I can do this with two Squid boxes instead, rather than > using the ISA. Buying hardware and software for the ISA is very > expensive, so I want to avoid it if I can. > > I have looked through the squid.conf, but not really sure what I need > to be reading up On. Is it Cache_peer sections, or perhaps > redirectors. If I can merely direct all requests > that match a certain IP range or domain name then I think I will be onto > a winner. > > Thanks in advance. > Chris > > PS After lots of reading on the FAQs I managed to get NTLM > authentication working, a nice feature to have! >
