Hi! The httpd_accel_host tag is with the default value... What can I try to do with this?
My Linux has 2.4 kernel and iptables version is 1.2.4. Thanks! Seeya! --- Ehsan Lesani <[EMAIL PROTECTED]> escreveu: > Dear firend. > When you want to use squid in transparent mode you > should config some tags > such as httpd_accel_host if you do not set them then > you can not use your > cache in transparent mode. > > And one thing else would you please tell me your > iptables version and your > linux version ??? > > Best Regards. > Ehsan Lesani. > ----- Original Message ----- > From: "Luciano Bernardes de Paula" > <[EMAIL PROTECTED]> > To: "Ehsan Lesani" <[EMAIL PROTECTED]>; > <[EMAIL PROTECTED]> > Cc: "Luciano Bernardes de Paula" > <[EMAIL PROTECTED]> > Sent: Tuesday, August 05, 2003 8:02 PM > Subject: Re: [squid-users] URL could not be > retrieved error... > > > > Hi! > > > > I tried the rule you wrote, but I got no > success... > > Btw, the rule I wrote in my first message wasn't > > accurate... In the box, I used the "-t nat". :) > > > > What tricks me is that going through the browser, > all > > works fine... Through the redirect, the error page > > appear. > > > > The error page contains the following message: > > > > ===== Error message ===== > > > > ERROR > > The requested URL could not be retrieved > > > > --------------------------------------------- > > > > While trying to retrieve the URL: / (*) > > > > The following error was encountered: > > > > Invalid URL > > Some aspect of the requested URL is incorrect. > > Possible problems: > > > > Missing or incorrect access protocol (should be > > `http://'' or similar) > > Missing hostname > > Illegal double-escape in the URL-Path > > Illegal character in hostname; underscores are not > > allowed > > > > ===== Error message ===== > > > > At the point marked with (*) instead of showing > the > > url I actually tried to reach (in this case > > http://www.yahoo.com) only a slash (/) appears, as > a > > link to the url. When I click it, the same page is > > shown. > > > > It seems to be some error about a bad written > url... > > but I'm sure I wrote it right! :) > > > > Is there anything to do in squid.conf? > > > > Thank you! > > > > Seeya! > > > > --- Ehsan Lesani <[EMAIL PROTECTED]> escreveu: > > Dear > > frined. > > > A t first you ought to enbale forwarding on your > > > squid box. > > > Then you should use this command to set its > > > transparency : > > > > > > iptables -t nat -A PREROUTING -p tcp -i > <interface > > > name> --dport 80 -j > > > REDIRECT --to-port 3128 > > > > > > Then it should be work > > > > > > On of your problems is that you want to DNAT > these > > > packets but you did not > > > use from nat table so it should not work you > know. > > > > > > Ehsan Lesani > > > > > > ----- Original Message ----- > > > From: "Luciano Bernardes de Paula" > > > <[EMAIL PROTECTED]> > > > To: "squid" <[EMAIL PROTECTED]> > > > Sent: Tuesday, August 05, 2003 4:11 PM > > > Subject: [squid-users] URL could not be > retrieved > > > error... > > > > > > > > > > Hi! > > > > > > > > I'm having the following problem with squid.I > have > > > a > > > > machine running squid (squid box) and some > > > stations > > > > that are supposed to go through the squid box. > > > > > > > > When I set the browser of a station to go > through > > > the > > > > squid box (setting up to go through a proxy > > > informing > > > > the IP of squid box and port) everything works > > > just > > > > fine. > > > > > > > > But when I use some iptables redirect rules > ("all > > > > incoming pkts destinated to port 80, go to > port > > > 3128") > > > > in the squid box and set that as gateway for > the > > > > station, to make all the process transparent, > any > > > site > > > > I try to reach from the station receives de > "URL > > > could > > > > not be retrieved..." error. > > > > > > > > I think that the redirect is working, because > the > > > > error page that is shown is generated by > squid. > > > > > > > > What can be wrong? What's the difference > between > > > go > > > > through a proxy setting up the browser or by > > > > redirecting? > > > > > > > > I'm using squid-2.5STABLE and the redirect > rule > > > that > > > > I'm using is: > > > > > > > > iptables -A PREROUTING -s station_IP -d ! > > > squid_box > > > > -dport 80 -j DNAT --to-destination > squid_box:3128 > > > > > > > > I also tried this one: > > > > > > > > iptables -A PREROUTING -s station_IP -d ! > > > squid_box > > > > -dport 80 -j REDIRECT -to-port 3128 > > > > > > > > I think that if the squid wasn't working, I > could > > > not > > > > go through it even setting the browser, and if > the > > > > redirect wasn't working, I wouldn't receiving > the > > > > error page generated by the squid... Am I > right? > > > > > > > > Is there a light at the end of the tunnel? :-) > > > > > > > > Thanks a lot! > > > > > > > > > > > > > > > > > > _______________________________________________________________________ > > > > Conheça o novo Cadê? - Mais rápido, mais fácil > e > > > mais preciso. > > > > Toda a web, 42 milhões de páginas brasileiras > e > > > nova busca por imagens! > > > > http://www.cade.com.br > > > > === message truncated === _______________________________________________________________________ Conheça o novo Cadê? - Mais rápido, mais fácil e mais preciso. Toda a web, 42 milhões de páginas brasileiras e nova busca por imagens! http://www.cade.com.br
