Pada 14-Aug-2003, Adam Aube menulis: > > But alas, even after setting the browser to use 10.1.1.1 as its proxy > > server, and even ping can be done from both sides (from client and > > from the proxy), I still [can't] surf internet from a dial access... > > First thing to figure out is if this is a Squid problem or a > networking problem.
> Step 1: > > Try to telnet to the IP and TCP port that Squid runs on. If you get a > connection, type "HEAD" and hit enter twice. You should get an error > message from Squid that starts like this: > > HTTP/1.0 400 Bad Request > Server: squid/[version] I haven't made some try yet, but I will and will tell you what > Step 2: > Use both ping and the Squid client to see if you can connect to the > Internet. >From dialling client, right ? ping worked but squid client didn't > If either step 1 or 2 fails, then this probably isn't a Squid problem. Hmm ok > If both Step 1 and 2 succeed, then check your Squid acls - especially > any that control access by source IP address. I think I already allow all clients coming from our IP address range.. > Adam Thanks aqil