Had it covered.. thanks for the help though. ip wccp version 2 ip wccp web-cache redirect-list TEST ! ! interface Serial1/0 description MY-GW bandwidth 3072 ip address 208.246.26.1 255.255.255.252 ip wccp web-cache redirect out service-policy output MY-Policies no ip mroute-cache ! ! ip access-list standard TEST permit 192.168.1.100 !
-Jason -----Original Message----- From: Sukhjit Singh [mailto:[EMAIL PROTECTED] Sent: Thursday, August 21, 2003 8:34 AM To: [EMAIL PROTECTED] Subject: Re: [squid-users] WCCPV2 Importance: High Hi Jason, What about the ip wccp webcache redirect out on the edge interface. Regards Sukhjit Singh Network Administrator Emmsons Infotech Ltd. SCO 13-14-15, Sec 34A, Chandigarh-160 022 (Ph): +91 172 606664 [EMAIL PROTECTED] http://www.emmtel.com ----- Original Message ----- From: "Jason Chin" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, August 21, 2003 4:59 PM Subject: [squid-users] WCCPV2 > Hi guys, im trying to get squid with wccpv2 running on a Redhat 8.0 box but > im having some problems. Im using a Cisco 3661 Router with IOS 12.2(15)T1. I > have successfully patched and recompiled my kernel without any errors with > the ip_wccp-2_4_18.patch found at squid.visolve.com. Im using Squid Cache > version 2.5.STABLE3 which has also been patched without any errors using the > wccpv2.patch and built with options: > ./configure --enable-async-io=120 --enable-removal-policies=heap --enable-ki > ll-parent-hack --enable-cachemgr-hostname=Alpha-Cache --enable-htcp --enable > -linux-netfilter --disable-hostname-checks --enable-cache-digests --enable -w > ccpv2. The squid.conf is the same i use on my mini squid farm (4 redhat 8.0 > boxes running squid 2.5 stable 3 and wccpv1) changing only stuff like > visible/unique_hostname and the new wccpv2 configs found after patching. > Rules for transparent proxy has been configured on the squid box > /sbin/iptables -t nat -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j > REDIRECT --to-ports 3128. I have confirmed squid and the port redirection is > working by configuring my browser to use the squid server as its proxy at > port 80 and 3128. > The Router and the squid wccpv2 box seem to be communicating with wccpv2: > > 2003/08/21 07:15:05| WCCP2 Assigning Redirect > 2003/08/21 07:15:11| Incoming WCCP v2 I_SEE_YOU length 132. > 2003/08/21 07:15:11| Incoming WCCP2_I_SEE_YOU received id = 4. > 2003/08/21 07:15:11| Incoming WCCP2_I_SEE_YOU member change = 0 tmp=2. > 2003/08/21 07:15:11| Incoming WCCP2_I_SEE_YOU member change = 2. > 2003/08/21 07:15:22| Incoming WCCP v2 I_SEE_YOU length 132. > 2003/08/21 07:15:22| Incoming WCCP2_I_SEE_YOU received id = 5. > 2003/08/21 07:15:22| Incoming WCCP2_I_SEE_YOU member change = 2 tmp=2. > 2003/08/21 07:15:33| Incoming WCCP v2 I_SEE_YOU length 132. > 2003/08/21 07:15:33| Incoming WCCP2_I_SEE_YOU received id = 6. > > WCCP-EVNT:S00: Built new router view: 0 routers, 0 usable web caches, change > # 00000001 > WCCP-PKT:S00: Sending I_See_You packet to 192.168.1.10 w/ rcv_id 00000001 > Aug 21 11:03:31: %WCCP-5-CACHEFOUND: Web Cache 192.168.1.10 acquired > WCCP-PKT:S00: Received valid Here_I_Am packet from 192.168.1.10 w/rcv_id > 00000001 > WCCP-EVNT:S00: Built new router view: 1 routers, 1 usable web caches, change > # 00000002 > WCCP-PKT:S00: Sending I_See_You packet to 192.168.1.10 w/ rcv_id 00000002 > WCCP-PKT:S00: Received valid Here_I_Am packet from 192.168.1.10 w/rcv_id > 00000002 > WCCP-PKT:S00: Sending I_See_You packet to 192.168.1.10 w/ rcv_id 00000003 > > CORE-ROUTER#sho ip wccp web-cache > Global WCCP information: > Router information: > Router Identifier: 208.246.26.1 > Protocol Version: 2.0 > > Service Identifier: web-cache > Number of Cache Engines: 1 > Number of routers: 1 > Total Packets Redirected: 0 > Redirect access-list: TEST > Total Packets Denied Redirect: 3778 > Total Packets Unassigned: 2090 > Group access-list: -none- > Total Messages Denied to Group: 0 > Total Authentication failures: 0 > > CORE-ROUTER#sho ip wccp web-cache detail > WCCP Cache-Engine information: > Web Cache ID: 192.168.1.10 > Protocol Version: 2.0 > State: Usable > Initial Hash Info: 00000000000000000000000000000000 > 00000000000000000000000000000000 > Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF > FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF > Hash Allotment: 256 (100.00%) > Packets Redirected: 0 > Connect Time: 00:00:55 > > However there is no activity in my squid access.log and surfing does not > work once wccpv2 is enabled on the router. Can anyone assist? Thanking you > in advance. > > -Jason > > > > >