--- Awie <[EMAIL PROTECTED]> wrote: > > /sbin/modprobe ip_wccp > > echo 1 > /proc/sys/net/ipv4/ip_forward > > /sbin/iptables -t nat -A PREROUTING -i eth0 -p tcp > > --dport 80 -j REDIRECT --to-port 3128 > > > > First line is load ip_wccp after every reboot > > Second will enable ip forwarding > > Does it be needed to enable ip forwarding if I only > have 1 N
this command is needed when you are using Virtual interface like for GRE tunnel i think here it is not needed > Thx & Rgds, > > Awie > > > Third line will enable iptables > > > > Thanks and Regards > > > > > > > > --- Adeel Asher <[EMAIL PROTECTED]> wrote: > > > Dear Mahmood Ahmed > > > > > > Here is the Linux configuration: > > > > > > Patching Kernel with WCCP v1 Support > > > > > > The following steps are needed: > > > > > > 1.Download the ip_wccp.c from > > > > > > http://www.squid-cache.org/WCCP-support/Linux/ip_wccp.c > > > .Compile ip_wccp.c > > > using the following command: > > > > > > gcc -D__KERNEL__ > -I/usr/src/linux-2.4.18-3/include > > > -Wall -Wstrict-prototypes > > > \ > > > -O2 -fomit-frame-pointer -fno-strict-aliasing > -pipe > > > -fno-strength-reduce \ > > > -m386 -DCPU=386 -DMODULE -DMODVERSIONS -include > \ > > > > /usr/src/linux-2.4.18-3/include/linux/modversions.h > > > -c ip_wccp.c > > > > > > After this, the compiled ip_wccp.o will be > created. > > > > > > 2.Copy ip_wccp.o to > > > /lib/modules/2.4.18-3/kernel/net/ipv4/ip_wccp.o. > > > > > > [EMAIL PROTECTED] ip_wccp.o > > > /lib/modules/2.4.18-3/kernel/net/ipv4/ip_wccp.o. > > > > > > Then edit /lib/modules/2.4.18-3/modules.dep > > > Add the line: > > > /lib/modules/2.4.18-3/kernel/net/ipv4/ip_wccp.o: > > > > > > 3. Test the module with: > > > /sbin/modprobe ip_wccp > > > /sbin/depmod -a -e > > > This should report no errors. > > > > > > > > > > > > > > > > > > > > > > > > -----Original Message----- > > > From: Mahmood Ahmed > > > [mailto:[EMAIL PROTECTED] > > > Sent: Thursday, February 26, 2004 2:42 AM > > > To: [EMAIL PROTECTED] > > > Cc: [EMAIL PROTECTED] > > > Subject: RE: [squid-users] WCCP Configuration > > > > > > Hello Adeel > > > > > > can you please also explain the step by step > (like > > > you did below) wccp > > > configuration for OS (Redhat 9.0) and Squid too. > > > > > > Regards > > > > > > Mahmood Ahmed > > > Buraak Telecommunications Pvt. Ltd. > > > > > > --------------------------------------------------------- > > > > > > This mail has been sent using Buraak Net's > Mailing > > > System > > > (http://www.buraak.net.pk) > > > > > > ---------- Original Message ----------- > > > From: "Adeel Asher" <[EMAIL PROTECTED]> > > > To: "'squid'" <[EMAIL PROTECTED]> > > > Sent: Wed, 25 Feb 2004 10:34:45 +0500 > > > Subject: RE: [squid-users] WCCP Configuration > > > > > > > Here You Go > > > > > > > > Router # > > > > Router (config)# ip wccp version 1 > > > > Router (config)# ip wccp web-cache > redirect-list > > > 125 > > > > Router (config)# ip wccp web-cache redirect > out > > > > Router (config)# ip wccp redirect exclude in > > > > Router (config)# ip wccp web-cache redirect > out > > > > > > > > Access-List 125 > > > > > > > > permit ip 192.168.92.0 0.0.0.255 any > > > > permit ip 192.168.93.0 0.0.0.255 any > > > > permit ip 192.168.94.0 0.0.0.255 any > > > > permit ip 192.168.95.0 0.0.0.255 any > > > > permit ip 192.168.96.0 0.0.0.255 any > > > > permit ip 192.168.97.0 0.0.0.255 any > > > > permit ip 192.168.98.0 0.0.0.255 any > > > > > > > > All permitted hosts in this access list will > be > > > redirected to squid for > > > web > > > > traffic. > > > > > > > > Router #Conf t > > > > Router (config)# > > > > Router (config)# interface fastethernet 0 > > > > Router(config-if)# ip wccp web-cache redirect > out > > > > > > > > Router # Conf t > > > > Router(config)# > > > > Router(config)# Interface serial 0 > > > > Router(config-if)# ip wccp redirect exclude in > > > > > Router(config-if)# ip wccp web-cache redirect > out > > > > > > > > I am assuming that your router serial is > connected > > > to WAN and FastEthernet > > > > > > > to LAN. If you have more than one serials you > will > > > have to enable it on > > > all. > > > > > > > > Regards, > > > > Adeel Asher > > > > WorldCALL Multimedia > > > > Lahore > > > > PK > > > > > > > > -----Original Message----- > > > > >From: Danish Khan > [mailto:[EMAIL PROTECTED] > > > > > > > > >Sent: Wednesday, February 25, 2004 4:31 AM > > > > >T0: 'squid' > > > > >Subject: [squid-users] WCCP Configuration > > > > > > > > >Can any body please explain the router > > > configuration for WCCP. > > > > > > > > >Danish Khan > > > ------- End of Original Message ------- > > > > > > > > > > > ATTACHMENT part 2 application/pdf name=SQUID.pdf > > > > > > > > __________________________________ > > Do you Yahoo!? > > Get better spam protection with Yahoo! Mail. > > http://antispam.yahoo.com/tools > > __________________________________ Do you Yahoo!? Get better spam protection with Yahoo! Mail. http://antispam.yahoo.com/tools