Hi everybody, > Download the entire package: > http://www.squid-cache.org/WCCP-support/Linux/ip_wccp-1.6.tar.gz > It includes a Makefile that should allow you to build on kernel 2.6.X
1. I downloaded the above tar package in Fedora core kernel 2.6 and kept in ip_wccp folder . 2. build the kernel2.6 with my requirements and save in .config file 3. from the kernel root installed the ip_wccp by giving the command "make install" I got the given below errors and could not integrate ip_wccp with new kernel2.6. Hope to get your advice as early as possible. Thanks for your mail in squid chain, regards, eswar ------------------- drivers/ide/pci/cs5530.c: In function `init_chipset_cs5530': drivers/ide/pci/cs5530.c:312: warning: ignoring return value of `pci_set_mwi', declared with attribute warn_unused_result ------------------ drivers/pci/bus.c: In function `pci_enable_bridges': drivers/pci/bus.c:131: warning: ignoring return value of `pci_enable_device', declared with attribute warn_unused_result ---------------- drivers/video/fbmem.c: In function `fb_cursor': drivers/video/fbmem.c:917: warning: passing arg 2 of `get_user_size' discards qu --------------- net/ipv4/ipmr.c:112: warning: `pim_protocol' defined but not used -------------- Root device is (3, 5) Boot sector 512 bytes. Setup is 5050 bytes. System is 1277 kB Kernel: arch/i386/boot/bzImage is ready sh /usr/src/linux-2.6.5-1.358_wccp/arch/i386/boot/install.sh 2.6.5-1.358custom arch/i386/boot/bzImage System.map "" WARNING: Couldn't open directory /lib/modules/2.6.5-1.358custom: No such file or directory FATAL: Could not open /lib/modules/2.6.5-1.358custom/modules.dep.temp for writing: No such file or directory /lib/modules/2.6.5-1.358custom is not a directory. mkinitrd failed make[1]: *** [install] Error 1 make: *** [install] Error 2
