That isn't transparent at all, actually. set the environment variable http_proxy to the ip address (or name) and port of your squid machine, so wget requests are proxied, which is a requirement for your testing purposes.
Tim Rainier Information Services, Kalsec, INC [EMAIL PROTECTED] "Fabiano Silos Reis" <[EMAIL PROTECTED]> wrote on 10/10/2005 02:17:29 PM: > Squid is configured as a kind of transparent proxy. > > wget resolve the name for domain.com as the ip address of squid server. > When squid tries to resolve domain.com it asks to a dns server who > answer the ip address of the Alteon VIP. In that way it work as a > transparent proxy. > > Thanks in advance, > > Fabiano > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Sent: Monday, October 10, 2005 12:40 PM > To: squid-users@squid-cache.org > Subject: Re: [squid-users] Squid: no_cache directive issue. > > Pardon the standard "is it plugged in?" question, but.... > > Does wget know there's a proxy server it needs to go through? > Unless you're running the proxy via port 80 (or it's transparent), wget > does not appear to be going through a proxy, which would > make your test useless. > > If your proxy is not set up transparently, you need to set the > environment > variable: http_proxy=ipaddress:port of the proxy server. > > Just a thought. :-) > > Tim Rainier > Information Services, Kalsec, INC > [EMAIL PROTECTED] > > > > "Fabiano Silos Reis" <[EMAIL PROTECTED]> > 10/10/2005 12:31 PM > > To > <squid-users@squid-cache.org> > cc > > Subject > [squid-users] Squid: no_cache directive issue. > > > > > > > Hello, > > Is there any kind of memory cache even if the object is marked to not to > be cached? > > On my tests: > > I tried with > > acl someserver dstdomain domain.com > no_cache deny someserver > > Using wget to debug it I have: > > [EMAIL PROTECTED] bin]# wget -S -O x http://domain.com/ > --10:04:43-- http://domain.com/ > => `x' > Resolving domain.com... 10.0.19.2 > Connecting to domain.com[10.0.19.2]:80... connected. > HTTP request sent, awaiting response... > 1 HTTP/1.0 302 Moved Temporarily > 2 Date: Mon, 10 Oct 2005 13:04:42 GMT > 3 Server: Apache/2.0.54 (Unix) > 4 Location: http://domain.com/@/ > 5 Content-Length: 286 > 6 Content-Type: text/html; charset=iso-8859-1 > 7 X-Cache: MISS from squid.domain.com > 8 Connection: keep-alive > Location: http://domain.com/@/ [following] > --10:04:43-- http://domain.com/@/ > => `x' > Connecting to domain.com[10.0.19.2]:80... connected. > HTTP request sent, awaiting response... > 1 HTTP/1.0 200 OK > 2 Date: Mon, 10 Oct 2005 13:04:42 GMT > 3 Server: Apache/2.0.54 (Unix) > 4 Content-Length: 1252 > 5 Content-Type: text/html > 6 X-Cache: MISS from squid.domain.com > 7 Connection: keep-alive > > 100%[=======================================>] 1,252 --.--K/s > > 10:04:43 (11.94 MB/s) - `x' saved [1,252/1,252] > > As you can see the answer is not being cached by the squid server. > > Explaining more about domain.com: > > Domain.com is being served by 2 webservers that are on the back of a > Alteon Switch. These two are real servers for a virtual server. Alteon > manipulates the connection as a transparent balancer and it is > configured with round robin algorithm, it is, each connection to port 80 > of the virtual server is redirected to a real server. > > In the body of the HTML I put a debug message to know where the answer > came from. In this case if the answer came from 'webserver1' I will see > in the body the phrase: "this came from webserver1". > > My problem: > > If the content is not being cached why do I receive only answers from > webserver1 when I get from squid? I tried running wget lot of times and > I always get in the body the same answer caming from webserver1. > > If I point wget to get the content direct from the virtual server > (Configured in the alteon switch) I receive different body on each get. > > > What I think it is happening: > > I think this is being caused by some memory cache algorithm. Even being > explicit saying to squit to not to cache a content it retain the object > for seconds in its memory. > > I did a test on my server wich is very simple. I wget just one time from > http://domain.com and after exactly 15 seconds I wget it again and there > it is. The body came with the debug flag from "webserver2". Is it a > proof of something or not? > > I appreciate any help. > > Fabiano > > Here is my squid.conf: > > http_port 10.0.19.2:80 > cache_mem 64 MB > maximum_object_size 4096 KB > maximum_object_size_in_memory 100 KB > fqdncache_size 1024 > cache_replacement_policy lru > memory_replacement_policy lru > cache_dir ufs /iG/http_servers/squid/bin/var/cache 40000 16 256 > cache_access_log /iG/logs/squidzone/zis-01-access_log > logfile_rotate 0 > cache_log /iG/http_servers/squid/bin/var/logs/cache.log > cache_store_log /iG/http_servers/squid/bin/var/logs/store.log > #cache_store_log none > emulate_httpd_log on > debug_options NONE,0 > log_fqdn off > redirect_rewrites_host_header on > > acl someserver dstdomain zone.ig.com.br > no_cache deny someserver > #always_direct allow someserver > > acl alteon src 10.0.0.0/255.0.0.0 > acl PURGE method PURGE > http_access allow PURGE alteon > http_access deny PURGE > > quick_abort_min 0 KB > quick_abort_max 0 KB > half_closed_clients off > shutdown_lifetime 10 seconds > acl all src 0.0.0.0/0.0.0.0 > acl in_localhost src 127.0.0.0/8 > acl manager proto cache_object > acl localhost src 127.0.0.1/255.255.255.255 > acl to_localhost dst 127.0.0.0/8 > acl SSL_ports port 443 563 > acl Safe_ports port 80 > acl CONNECT method CONNECT > acl to_rz dst 10.0.0.0/255.0.0.0 > acl internal_port port 80 > http_access allow all to_rz > http_access allow Safe_ports > http_access allow internal_port > http_access allow in_localhost to_localhost > http_access deny CONNECT SSL_ports > http_access deny all > http_reply_access allow all > icp_access allow all > visible_hostname squid.domain.com > httpd_accel_host virtual > httpd_accel_port 80 > httpd_accel_single_host off > httpd_accel_with_proxy off > httpd_accel_uses_host_header on > client_db off > coredump_dir /var/cache > > squid -v > > [EMAIL PROTECTED] bin]# sbin/squid -v > Squid Cache: Version 2.5.STABLE11-RC2 > configure options: --prefix=/squid/bin-2.5.11-RC2 --enable-underscores > '--enable-removal-policies=lru heap' '--enable-err-languages=English > Portuguese' --enable-default-err-language=Portuguese > --enable-referrer-log --enable-useragent-log '--enable-storeio=ufs > diskd' --with-pthreads > > >
