*********************** Your mail has been scanned by InterScan MSS. ***********-***********
I finally got it work after compiling the ip_wccp.c and setting up the GRE tunneling between squid and the router.. Thanks a lot.. Jason -----Original Message----- From: Jason Yap [mailto:[EMAIL PROTECTED] Sent: Sunday, March 12, 2006 2:59 PM To: 'squid-users@squid-cache.org' Subject: FW: [squid-users] WCCP and squid problem !!!! Help me!! I have "ip wccp web-cache redirect out" in my LAN interface (e1/0)... Jason -----Original Message----- From: Jason Yap [mailto:[EMAIL PROTECTED] Sent: Sunday, March 12, 2006 10:56 AM To: squid-users@squid-cache.org Subject: [squid-users] WCCP and squid problem !!!! Help me!! *********************** Your mail has been scanned by InterScan MSS. ***********-*********** *********************** Your mail has been scanned by InterScan MSS. ***********-*********** Hi, I've been trying to get transparent caching work with my Cisco 3620 router but without a success. Here are my configs: Router with IOS version 12.2(32): ---------------------------------------------------------------- ip wccp version 1 ip wccp web-cache ! no ip domain-lookup ! interface Ethernet0/0 description Interface to ISP ip address 10.254.40.10 255.255.255.252 ip nat outside full-duplex ! interface Ethernet0/1 description To SQUID web cache ip address 192.168.2.1 255.255.255.248 ip nat inside no keepalive full-duplex interface Ethernet1/0 description TO LOCAL LAN ip address 192.168.1.1 255.255.255.248 ip nat inside full-duplex ! ip nat inside source list 101 interface Ethernet0/0 overload ip classless ip route 0.0.0.0 0.0.0.0 10.254.40.9 (default route to ISP) no ip http server ! access-list 101 permit ip 192.168.1.0 0.0.0.7 any access-list 101 permit ip 192.168.2.0 0.0.0.7 any Squid (ver 2.4 Stable7.4) config: ---------------------------------- http_port 3128 httpd_accel_port 80 httpd_accel_host virtual httpd_accel_with_proxy on httpd_accel_uses_host_header on wccp_router 192.168.2.1 wccp_version 4 --------------------------------- show ip wccp web-cache Global WCCP information: Router information: Router Identifier: 192.168.2.1 Protocol Version: 1.0 Service Identifier: web-cache Number of Cache Engines: 1 Number of routers: 1 Total Packets Redirected: 368 Redirect access-list: -none- Total Packets Denied Redirect: 0 Total Packets Unassigned: 0 Group access-list: -none- Total Messages Denied to Group: 0 Total Authentication failures: 0 -------------------------------------------------------------- show ip wccp web-cache detail WCCP Cache-Engine information: Web Cache ID: 0.0.0.0 Protocol Version: 0.4 State: Usable Initial Hash Info: 00000000000000000000000000000000 00000000000000000000000000000000 Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF Hash Allotment: 256 (100.00%) Packets Redirected: 277 Connect Time: 00:43:42 ---------------------------------------------------------- show ip wccp web-cache view WCCP Routers Informed of: -none- WCCP Cache Engines Visible: 192.168.2.2 WCCP Cache Engines NOT Visible: -none- ------------------------------------------------------------- Squid is confirmed working as I can browse the web if I manually configure the squid IP in my browser and I could see something in squid's "access log" Router interface e0/0 is going to my ISP, e0/1 is going to my SQUID box (on Redhat 8.0) and e1/0 in to my LAN users. I'm seeing increased "Packets Redirected" in the router when I enable transparent proxy, but browsing failed. Nothing was shown in my squid's "access.log" Any anyone help?? Thanks Jason
