give me this data :
-cisco router version & ios version
-cisco runnning config
-kernel version
-iptables setting
-output of ifconfig
-when ./configure , your need add this options --enable_wccpv2
rgds,
Tino
----- Original Message -----
From: "Shoebottom, Bryan" <[EMAIL PROTECTED]>
To: <squid-users@squid-cache.org>
Sent: Saturday, July 15, 2006 1:27 AM
Subject: RE: [squid-users] 2.6S1 WCCP2 problems
Does anyone have this problem on 2.6S1???
With debug on on the router I get this error:
Here_I_Am packet from 10.10.101.3 w/bad rcv_id 00000000
Any help would be appreciated.
Thanks,
Bryan
-----Original Message-----
From: Shoebottom, Bryan [mailto:[EMAIL PROTECTED]
Sent: July 13, 2006 1:18 PM
To: squid-users@squid-cache.org
Subject: [squid-users] 2.6S1 WCCP2 problems
Hey,
I can't seem to get wccpv2 working in squid 2.6Stable1. My wccp config is
as follows:
wccp2_router 10.10.101.1
wccp2_forwarding_method 1
wccp2_return_method 1
wccp2_service standard 0
My router only seems to see L2 redirection even though I have specified
GRE/WCCP:
ROUTER#sho ip wcc we d
WCCP Cache-Engine information:
Web Cache ID: 10.10.101.3
Protocol Version: 2.0
State: NOT Usable
Redirection: L2
Packet Return: L2
Packets Redirected: 0
Connect Time: 00:00:29
Assignment: MASK
ROUTER#
After 30 seconds, the connect time for the cache restarts. I am running a
2.6.17 kernel which supports WCCP in the GRE module and have this loaded as
gre0.
Has anyone else gotten this to work under the new 2.6 release yet? Anyone
have any suggestions?
Thanks,
Bryan
