Hi Tino,
The IPtables have been implemented by default with FC and there is no
directory for the source of iptables.
Can you give me the step by step procedure so that I can try?
Have tried a lot of suggestions and am still not going ahead.
Regards
Sunil
tino wrote:
Your iptables patch not complete fc5 use iptables rpm source, you need
iptables from tar.gz/bz source
- uninstall the iptables rpm, - download tar.gz/bz source from
netfilter.org
- patch it with iptables-1.3-cttproxy.diff before ./configure
rgds,
Tino
----- Original Message ----- From: "Sunil K.P." <[EMAIL PROTECTED]>
To: <squid-users@squid-cache.org>
Sent: Friday, August 11, 2006 4:33 PM
Subject: [squid-users] Squid -2.6 with Tproxy
Hi,
I have squid 2.6 STABLE 2 running on FC 2.6.15.2.
It is working fine in transparent mode.
But I am trying to use Tproxy so that all the requests will spoofed
to show the clients IP address and not the cache server.
The patches have been applied to the kernel, compiled and applied as
per procedure.
After restarting the system the modules ipt_tproxy and ipt_TPROXY are
loaded.
The problem starts when I apply the following iptables rule
iptables -t tproxy -A PREROUTING -i eth0 -p tcp -m tcp --dport 80 -j
TPROXY --on-port 3128
The traffic stops going thru the cache server. If the rule is removed
the traffic goes smoothly.
Cache.log shows the following error
tproxy ip=192.168.10.11,0x9eec383e,port=0 ERROR ASSIGN
There seems to be no proper documentation for implementation of
tproxy with squid on the net.
Pls. advice.
Regards
Sunil
