Hi Steven, I have tried following but it failed dd if=/dev/zero bs=1048576 count=2048 of=/cache_log/coss
Part of Squid.conf ---------------------- cache_dir coss /cache_log/coss 2500 block-size=512 max-size=131072 cache_access_log /var/log/squid/access.log cache_log /var/log/squid/cache.log cache_store_log none cache_swap_log none Squid was compiled as ---------------------------- ./configure --enable-storeio=coss --enable-coss-aio-ops --with-large-files While starting the squid i am getting error as 2006/08/14 19:36:37| WCCP Disabled. 2006/08/14 19:36:37| Ready to serve requests. 2006/08/14 19:36:37| COSS: /cache_log/coss: Rebuilding (0 % completed - 1/2500 stripes) 2006/08/14 19:36:39| COSS: /cache_log/coss: Rebuilding (5 % completed - 126/2500 stripes) 2006/08/14 19:36:40| COSS: /cache_log/coss: Rebuilding (10 % completed - 251/2500 stripes) 2006/08/14 19:36:42| COSS: /cache_log/coss: Rebuilding (15 % completed - 376/2500 stripes) 2006/08/14 19:36:43| COSS: /cache_log/coss: Rebuilding (20 % completed - 501/2500 stripes) 2006/08/14 19:36:44| COSS: /cache_log/coss: Rebuilding (25 % completed - 626/2500 stripes) 2006/08/14 19:36:45| COSS: /cache_log/coss: Rebuilding (30 % completed - 751/2500 stripes) 2006/08/14 19:36:47| COSS: /cache_log/coss: Rebuilding (35 % completed - 876/2500 stripes) 2006/08/14 19:36:48| COSS: /cache_log/coss: Rebuilding (40 % completed - 1001/2500 stripes) 2006/08/14 19:36:49| COSS: /cache_log/coss: Rebuilding (45 % completed - 1126/2500 stripes) 2006/08/14 19:36:50| COSS: /cache_log/coss: Rebuilding (50 % completed - 1251/2500 stripes) 2006/08/14 19:36:52| COSS: /cache_log/coss: Rebuilding (55 % completed - 1376/2500 stripes) 2006/08/14 19:36:53| COSS: /cache_log/coss: Rebuilding (60 % completed - 1501/2500 stripes) 2006/08/14 19:36:55| COSS: /cache_log/coss: Rebuilding (65 % completed - 1626/2500 stripes) 2006/08/14 19:36:57| COSS: /cache_log/coss: Rebuilding (70 % completed - 1751/2500 stripes) 2006/08/14 19:36:58| COSS: /cache_log/coss: Rebuilding (75 % completed - 1876/2500 stripes) 2006/08/14 19:36:59| COSS: /cache_log/coss: Rebuilding (80 % completed - 2001/2500 stripes) 2006/08/14 19:37:01| COSS: /cache_log/coss: Rebuilding (85 % completed - 2126/2500 stripes) 2006/08/14 19:37:02| COSS: /cache_log/coss: Rebuilding (90 % completed - 2251/2500 stripes) 2006/08/14 19:37:02| COSS: /cache_log/coss: Rebuilding (95 % completed - 2376/2500 stripes) FATAL: storeCossDirCloseTmpSwapLog: rename failed I don't know what went wrong. Regards Chima On 8/5/06, Steven Wilton <[EMAIL PROTECTED]> wrote:
----- Original Message ----- From: "chima s" <[EMAIL PROTECTED]> To: "squid mailing" <squid-users@squid-cache.org> Sent: Friday, August 04, 2006 8:24 PM Subject: [squid-users] coss configuration example > Hi, > > Can any one give the squid configuration to use coss cache_dir. > > My system info > > Fedora Core release 3 > Kernel : 2.6.10 > Squid : squid-2.6.STABLE2-20060804 > MEM: 2GB > HD : 2*72 GB SCSI > System Filesystem: reiserfs > > How COSS_MEMBUF_SZ is calculated for given cache_dir size > > Regards > Chima > The minimum config for a COSS dir is the following (for 100MB cache_dirs): cache_dir coss /var/spool/squid/coss 100 block-size=512 max-size=131072 or cache_dir coss /dev/sdb1 100 block-size=512 max-size=131072 If you set COSS to write to a flie, you must create the file manually. To do this, you can run: dd if=/dev/zero bs=1048576 count=<size> of=<file> If you set COSS to write direct to a block device, you need to make sure that the cache user has write permissions on the block device. The COSS_MEMBUF_SZ does not get set on a per-device basis. The magic number you need to be aware of is the block-size, which limits the size of the cache. The valid numbers are: block-size=512 - 8GB Max cache_dir size block-size=1024 - 16GB Max cache_dir size block-size=2048 - 32GB Max cache_dir size block-size=4096 - 64GB Max cache_dir size block-size=8192 - 128GB Max cache_dir size Steven
