thanks a lot... i change my squid from squid-2.5.STABLE6-3.4E.12 to squid-2.5.STABLE14-1.RHEL4
http://people.redhat.com/stransky/squid/ after that everything is working... with same configuration "squid-2.5.STABLE6-3.4E.12" failed to start properly... regards jerrynikky. On 8/18/06, Henrik Nordstrom <[EMAIL PROTECTED]> wrote:
On Fri, 2006-08-18 at 18:09 +0530, updatemyself . wrote: > is this correct? > http://www.squid-cache.org/mail-archive/squid-users/200508/0503.html > > i tried this way but its also not working > even squid fail to restart properly.. > > ----------------------------------------------------- > acl my_net src 10.0.0.1/255.255.255.0 > acl USERA src 10.0.0.1/255.255.255.255 > acl UPLIMIT req_header Content-Length [5-9][0-9]{5,} > acl UPMETH method post > http_access deny USERA UPMETH UPLIMIT > http_access allow my_net > http_access deny_all > --------------------------------------------------- Should work. Do you have any other http_access allow rules? And was your source IP 10.0.0.1 when testing this? (see access.log to confirm..) The first acl is slightly wrong. Should be 10.0.0.0/... but you should have noticed that already. any other complaints from "squid -k parse"? Regards Henrik
