This is what I found in FAQ
"23.6 Authentication in accelerator mode
Authentication is by default disabled in acceleartor mode in Squid-2.X due
to conflicts with transparent interception. To enable this feature, at the
top of acl.c add the following line:
#define AUTH_ON_ACCELERATION 1
Then "make install".
This feature is somewhat hidden because
* It hasn't been fully thought over yet. There are issues in caching
when combined with authentication, and more so when there is also
authentication to the backend servers..
* It easilly collides with transparent proxying, and many people
simply refuses to read warnings that a feature cannot be used in a
transparent proxy and try so anyhow.
The whole concept of "acceleration" in Squid is currently being reworked
for the Squid-3.0 release to fix this and a number of other issues."
Is there anything I am missing
Sameer Joshi
-----Original Message-----
From: "Mark Elsen" <[EMAIL PROTECTED]>
Sent: Fri, December 1, 2006 1:15 pm
To: [EMAIL PROTECTED]
Cc: squid-users@squid-cache.org
Subject: Re: [squid-users] Need Help in authentication
> Hi
>
> I have Squid 2.6 running successfully with SSL. Now I want my squid to
> authenticate users.
>
> So basically users will ve to authenticate twice
> 1. Reverse Proxy
> 2. Web application.
>
> 1. How do i get the authentication by reverse proxy?
> 2. Do I have to create Users and assign passwords on Squid or Squid can
> talk to my existing AD, domain servers
>
>
See FAQ (all explained).
M.
Sameer Joshi
Paladion Networks, India
Phone: 91-22-55910513
Fax: 91-22-55913580
Mobile:91-98191-86001
http://www.paladion.net
Disclaimer:
"This e-mail message may contain confidential or proprietary information.
Do not use it if you are not the original intended recipient. As e-mail
may be altered electronically, Paladion Networks cannot guarantee the
integrity of this communication. Before opening any attachments please
recheck them for viruses and defects"
