Hi, thank you very much for helping me troubleshooting this.
What we found out was, that the message about "w/bad recv_id" happens only once when squid is started. My other problem was solved by using the standard wccp2_service instead of the dynamic one. Finally, and most embarrassing to admit, by fooling around with different kernels, I had lost my gre tunnel and therefore made successfull url redirecting impossible.... The gre tunnel is back up and the redirecting is working fine. Now I just need to adjust my helper software to accept the additional group parameter (the url_rewrite helper). Thanks to all of you especially Henrik! You guys rock! Regards, Martin On Thursday 08 February 2007 20:05, Henrik Nordstrom wrote: > tor 2007-02-08 klockan 11:56 -0500 skrev Martin Kobele: > > For now I use one squid and one router. But once I get this to work, I > > plan on using 2 routers and most likely a second squid. Thus the dynamic > > configuration. > > The standard 0 (http) service is fine. The service definitions is just a > pattern on what kinds of packets to redirect. > > > wccp2_service dynamic 97 password=exPAS12 > > wccp2_service_info 97 protocol=tcp flags=src_ip_hash,ports_source > > priority=240 ports=80 > > This wccp service definition does not match client web requests. It > matches only server responses to client web requests. Such service is > only meaningful in tproxy enabled setups, and only in combination with > the standard 0 service.. > > Btw the "standard 0" (http) service is more or less equivalent to > > protocol=tcp flags=dst_ip_hash priority=240 ports=80 > > Regards > Henrik
