Hi,
In my cache.log i am seeing one error: "page faults with physical i/o:
1" other than that nothing on this box has changed.
For my firewall i'm using pf, and i use an rdr pass rule to redirect any
internal lan traffic to the router's squid port, this has worked fine so
far.
Would the core file be helpful?
Here's my squid.conf file, thanks a lot.
Dave.
http_port 127.0.0.1:3128 transparent
icp_port 0
hierarchy_stoplist cgi-bin ?
cache_mem 48 MB
cache_swap_high 100%
cache_swap_low 80%
maximum_object_size 4096 KB
minimum_object_size 0 KB
maximum_object_size_in_memory 8 KB
ipcache_size 1024
ipcache_low 90
ipcache_high 95
fqdncache_size 1024
cache_replacement_policy lru
memory_replacement_policy lru
cache_dir diskd /usr/local/squid/cache 600 32 512
access_log /usr/local/squid/logs/access.log squid
cache_log /usr/local/squid/logs/cache.log
cache_store_log none
emulate_httpd_log off
log_ip_on_direct on
mime_table /usr/local/etc/squid/mime.conf
log_mime_hdrs off
pid_filename /usr/local/squid/logs/squid.pid
log_fqdn off
check_hostnames off
allow_underscore off
unlinkd_program /usr/local/libexec/squid/unlinkd
acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl to_localhost dst 127.0.0.0/8
acl SSL_ports port 443
acl Safe_ports port 80 # http
acl Safe_ports port 21 # ftp
acl Safe_ports port 443 # https
acl Safe_ports port 70 # gopher
acl Safe_ports port 210 # wais
acl Safe_ports port 1025-65535 # unregistered ports
acl Safe_ports port 280 # http-mgmt
acl Safe_ports port 488 # gss-http
acl Safe_ports port 591 # filemaker
acl Safe_ports port 777 # multiling http
acl CONNECT method CONNECT
http_access allow manager localhost
http_access deny manager
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports
http_access deny to_localhost
acl our_networks src 192.168.5.0/24
acl chat dstdomain "/usr/local/etc/squid/chat.txt"
acl porn url_regex "/usr/local/etc/squid/porn"
acl spyware dstdomain "/usr/local/etc/squid/spyware.acl"
http_access allow our_networks !chat !spyware !porn
http_access deny all
http_reply_access allow all
cache_mgr [EMAIL PROTECTED]
cache_effective_user squid
httpd_suppress_version_string on
half_closed_clients off
redirect_program /usr/local/libexec/bannerfilter/redirector.pl
----- Original Message -----
From: "Tek Bahadur Limbu" <[EMAIL PROTECTED]>
To: "Dave" <[EMAIL PROTECTED]>
Cc: <squid-users@squid-cache.org>
Sent: Monday, June 25, 2007 2:07 PM
Subject: Re: [squid-users] FreeBSD Squid timeout issue
Dave wrote:
Hello,
This is a strange one. I've got a FreeBSD 6.2 router with squid on it
for transparent proxy. It has been working fine, until about 3 days ago
when i noticed one of my internal machines wasn't completing an http
transaction, in this case downloading of it's ports index. The connection
would start out extremely slowly and eventually timeout then giving an
error about a truncated file. I checked my firewall, hard disks, debug
logs, messages everything, couldn't find any error msgs or anything
obviously wrong. This morning an internal machine, this one a centos box,
began failing with it's yum updates, giving timeout errors on retrieving
rpm files from http sites. Again, i ran the log checks, didn't see
anything. So, i next checked the firewall, nothing in debug.log or
messages, but in the /usr/local/squid/logs directory i found two things.
The first was that the failed transactions were all returning http
response code 206, timeout? The second was that i had a 43 mb core file.
I shut down squid, turned off the transparent redirect rule in my
firewall and everything started working normally. If this core file is
useful in debugging i'd like to know what to do or where to send it, i
can post it on a web page if interested. I'd appreciate any suggestions.
The squid version used is 2.6.13, memory and cpu usage during the
times in question are not even moving, this system is not in any way
heavily loaded.
Hi Dave,
Are you sure that you did not modify anything substantial in the past 3
days? Firewall rules, sysctl tunables in your FreeBSD box?
The core file suggests that your Squid might have crashed. Are you sure
that there is nothing in your cache.log?
Which firewall do you use to do transproxy? Can you show us your relevant
firewall rules?
Also posting your squid.conf might help. How many users are accessing your
cache normally? If you manually use your proxy server in your web browser,
does it help speed up the web requests?
Thanking you...
Any suggestions appreciated.
Thanks.
Dave.
