On Mon, 28 Apr 2008, Wennie V. Lagmay wrote:
I am trying to configure squid wccp and cisco router but with no luck.
This is what I have done. Please check my procedure and confoguration:
for squid version 2.6Stable19 running on Fedora Core 8 64 bit with ip address
xx.xx.184.178
1. I configure squid with options enable-linux-netfilter
please provide output of "squid -v"
2. in squid.conf
http_port 8080 transparent
wccp2_router xx.xx.184.177
wccp2_version 4
wccp2_forwarding_method 1
wccp2_return_method 1
wccp2_service standard 0
wccp2_address 0.0.0.0
3. modprobe ip_gre
ip tunnel add wccp0 mode gre remote xx.xx.184.177 local xx.xx.184.178 dev eth1
ip addr add xx.xx.184.178/32 dev wccp0
ip link set wccp0 up
4.echo 0 >/proc/sys/net/ipv4/conf/wccp0/rp_filter
5.iptables -t nat -A PREROUTING -p tcp -i wccp0 -j REDIRECT --to-ports 8080
6. iptables -t nat -A PREROUTING -i eth0 -p tcp --dport 80 -j REDIRECT
--to-ports 8080
On Cisco router7206 npe300 with 12.2(31)
ip wccp version 2
ip wccp web-cache
!
interface fastethernet 1/0
description LAN
ip address 192.168.255.6 255.255.255.252
!
interface fastethernet 3/0
description internet connection
ip address xx.xx.184.177
ip wccp web-cache redirect out
!
ip route 0.0.0.0 0.0.0.0 192.158.255.5
which interface connects to internet. default route indicates fa1/0 to be
connected to internet. if it is fa1/0 the "ip wccp web-cache redirect out"
command should be in fa1/0.
Logs:
with linux cache.log I can see messages as:
wccp2HereIam: Sending to device id 0
Sending HereIam packet size 144
Incoming WCCPv2 I_SEE_YOU lenth 132
Complete packet receive
In Cisco router:
sho ip wccp web-cache
Global WCCP information:
Router information:
Router Identifier: 192.168.255.6
Protocol Version: 2.0
Service Identifier: web-cache
Number of Cache Engines: 1
Number of routers: 1
Total Packets Redirected: 201
Redirect access-list: -none-
Total Packets Denied Redirect: 0
Total Packets Unassigned: 0
Group access-list: -none-
Total Messages Denied to Group: 0
Total Authentication failures: 0
sho ip wccp web-cache detail
Web Cache ID: xx.xx.184.178
Protocol Version: 2.0
State: Usable
Initial Hash Info: 00000000000000000000000000000000
00000000000000000000000000000000
Assigned Hash Info: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
Hash Allotment: 256 (100.00%)
Packets Redirected: 201
Connect Time: 01:14:03
what about tcpdump on wccp0 interface.. does show any traffic being
redirected. does access.log show the connections??
It seems everything is working fine but configuring client browser without any
proxy it is not browsing. note that if I manually define the Ip address of the
transparent proxy I can browse the web.
Can anybody help me on my problem?
thank you very much,
Wennie
----- Original Message -----
From: "Adrian Chadd" <[EMAIL PROTECTED]>
To: "Wennie V. Lagmay" <[EMAIL PROTECTED]>
Cc: "Adrian Chadd" <[EMAIL PROTECTED]>, "squid-users"
<squid-users@squid-cache.org>
Sent: Saturday, April 26, 2008 8:31:43 PM (GMT+0300) Asia/Kuwait
Subject: Re: [squid-users] squid and wccp
On Sat, Apr 26, 2008, Wennie V. Lagmay wrote:
I have a question, do I need to enable ip_gre, ip_wccp on my system? using
kernel 2.6.24, i enable the ip_gre does it mean it aoutmatically enables the
ip_wccp?
Just ip_gre. the GRE code shipped in linux these days includes WCCPv2 packet
decoding.
HTH,
Adrian
thanks
----- Original Message -----
From: "Adrian Chadd" <[EMAIL PROTECTED]>
To: "Wennie V. Lagmay" <[EMAIL PROTECTED]>
Cc: "squid-users" <squid-users@squid-cache.org>
Sent: Saturday, April 26, 2008 12:38:07 PM (GMT+0300) Asia/Kuwait
Subject: Re: [squid-users] squid and wccp
http://wiki.squid-cache.org/ConfigExamples/
Adrian
On Sat, Apr 26, 2008, Wennie V. Lagmay wrote:
Hi all,
Can anybody give me a step by step configuration to enable WCCP in both router
and squid2.6.stable19.
Here are the details:
router = cisco7206VXR
IOS ver = 12.3 (8) T, RELEASE SOFTWARE (fc2)
FE0/0 = xx.xx.184.17/28
squid:
OS = FC8 64bit with kernel version 2.6.24.4-64.fc8 #1 SMP
squid version = squid-2.6Stable19
eth1 = xx.xx.184.22/28
I am trying to follow the configuration in squid FAQ but it is very hard for me
because this my first time to do thus kind of setup. I would highly appreciate
if you can provide me a step by step configuration for cisco router and squid
box to enable WCCP version 2
Thank you and best regards,
wennie
--
- Xenion - http://www.xenion.com.au/ - VPS Hosting - Commercial Squid Support -
- $25/pm entry-level VPSes w/ capped bandwidth charges available in WA -
--
