Chris Benesch wrote:
Hi,
First of all, you should change any to any to something more restrictive
like 10.0.0.0/8 to any. I don't think squid needs to read the packet filter
device, I've got a similar setup with 4.1 and it doesn't need to access the
packet filter directly.
Squid uses system calls to connect up ip-filter and ioctls for PF.
It does this at the highest priority it has available (root when able,
or the effective-user).
If anything has changed in 4.2 to break this, we'd like to know.
To make OpenBSD reload the configuration file, the easiest way is to just
issue a pfctl -e -f /etc/pf.conf and it should reload the rules. Just to
make sure you can do pfctl -d; pfctl -e -f /etc/pf.conf. It will stop then
start pf again.
-----Original Message-----
From: Indunil Jayasooriya [mailto:[EMAIL PROTECTED]
Sent: Monday, April 28, 2008 8:38 PM
To: squid-users
Subject: [squid-users] Fwd: HTTP Transparent Proxy on OpenBSD 4.2
What command I have to issue to complete this task with PF on OpenBSD
4.2?
> What should I do?
Configuring pf
The pf configuration is /etc/pf.conf. The file is documented in
pf.conf(5). This is a minimal example of the required rdr rule. Make
sure you also allow the redirected connections to pass, they'll have
destination address 127.0.0.1 when the filter rules are evaluated.
Redirection does not automatically imply passing. Also, the proxy must
be able to establish outgoing connections to external web servers.
int_if="gem0"
ext_if="kue0"
rdr on $int_if inet proto tcp from any to any port www -> 127.0.0.1 port
3128
pass in on $int_if inet proto tcp from any to 127.0.0.1 port 3128 keep
state
pass out on $ext_if inet proto tcp from any to any port www keep state
Note that squid needs to open /dev/pf in order to query the packet
filter. The default permissions for this file allow access only to
root. squid is running as user _squid, group _squid, so one way to
allow access to squid is by changing the group ID of the file to
_squid and make it group-accessable:
# chgrp _squid /dev/pf
# chmod g+rw /dev/pf
pls click below URL for more
http://www.benzedrine.cx/transquid.html
--
Thank you
Indunil Jayasooriya
--
Please use Squid 2.6.STABLE19 or 3.0.STABLE4
