Dear All: iptables squid -v Squid Cache: Version 3.1.1 configure options: '--prefix=/var/squid' '--sysconfdir=/etc' '--enable-arp-acl' '--enable-linux-netfilter' '--enable-pthreads' '--enable-err-language=Simplify_Chinese' '--enable-storeio=ufs' '--enable-default-err-language=Simplify_Chinese' '--enable-auth=basic' '--enable-baisc-auth-helpers=NCSA' '--enable-underscore' --with-squid=/usr/local/src/squid-3.1.1 --enable-ltdl-convenience
Why not Transparent proxy Help Me! Thanks! squid.conf acl manager proto cache_object acl localhost src 127.0.0.1/32 acl localhost src ::1/128 acl to_localhost dst 127.0.0.0/8 0.0.0.0/32 acl to_localhost dst ::1/128 # Example rule allowing access from your local networks. # Adapt to list your (internal) IP networks from where browsing # should be allowed acl localnet src 192.168.2.100-192.168.2.200/32 # RFC1918 possible internal network #acl localnet src 172.16.0.0/12 # RFC1918 possible internal network acl localnet src 192.168.3.100-192.168.3.200/32 # RFC1918 possible internal network acl localnet src fc00::/7 # RFC 4193 local private network range acl localnet src fe80::/10 # RFC 4291 link-local (directly plugged) machines #acl SSL_ports port 443 #acl Safe_ports port 80 # http #acl Safe_ports port 21 # ftp #acl Safe_ports port 443 # https #acl Safe_ports port 70 # gopher #acl Safe_ports port 210 # wais #acl Safe_ports port 1025-65535 # unregistered ports #acl Safe_ports port 280 # http-mgmt #acl Safe_ports port 488 # gss-http #acl Safe_ports port 591 # filemaker #acl Safe_ports port 777 # multiling http #acl CONNECT method CONNECT cache_effective_user squid cache_effective_group squid dns_nameservers 192.168.1.10 dns_nameservers 168.95.1.1 dns_nameservers 168.95.192.1 dns_nameservers 211.72.67.226 dns_nameservers 216.146.35.35 dns_nameservers 216.146.36.36 ipcache_size 1024 ipcache_low 90 ipcache_high 95 cache_mem 128 MB cache_access_log /var/log/squid/access.log cache_log /var/log/squid/cache.log cache_store_log /var/log/squid/store.log visible_hostname gw.efc.cory cache_mgr ka...@everfocus.com.cn # # Recommended minimum Access Permission configuration: # # Only allow cachemgr access from localhost http_access allow manager localhost http_access deny manager # Deny requests to certain unsafe ports #http_access deny !Safe_ports # Deny CONNECT to other than secure SSL ports #http_access deny CONNECT !SSL_ports # We strongly recommend the following be uncommented to protect innocent # web applications running on the proxy server who think the only # one who can access services on "localhost" is a local user #http_access deny to_localhost # # INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS # # Example rule allowing access from your local networks. # Adapt localnet in the ACL section to list your (internal) IP networks # from where browsing should be allowed http_access allow localnet http_access allow localhost allow_underscore on # And finally deny all other access to this proxy http_access deny all # Squid normally listens to port 3128 http_port 3128 # We recommend you to use at least the following line. hierarchy_stoplist cgi-bin ? # Uncomment and adjust the following to add a disk cache directory. cache_dir ufs /var/squid/var/cache 4096 16 256 # Leave coredumps in the first cache dir coredump_dir /var/squid/var/cache # Add any of your own refresh_pattern entries above these. refresh_pattern ^ftp: 1440 20% 10080 refresh_pattern ^gopher: 1440 0% 1440 refresh_pattern -i (/cgi-bin/|\?) 0 0% 0 refresh_pattern . 0 20% 4320 ----- Original Message ----- From: "Amos Jeffries" <squ...@treenet.co.nz> To: <squid-users@squid-cache.org> Sent: Thursday, April 22, 2010 1:27 PM Subject: Re: [squid-users] Help about iptable squid > kavin wrote: >> Dear All: >> >> Linux has three card: >> One is 192.168.1.250 (Internet) by 192.168.1.1 >> The other two are: 192.168.2.1, 192.168.3.1 >> Client: 192.168.2.100-192.168.2.200 / IP 192.168.3.100-192.168.3.200 >> >> I have a few questions >> 1: I'm in the allocation of time, add squid --enable-underscore options >> But on a visit to the site is still has underlined > > That made no sense at all. > Can you please describe the problem it another way? > >> 2: why Teamviever software from external links, always break, then cannot >> connect >> But, I have broken the network ,configuration files below > > Again. Is that a question? > > Something called "teamviewer" does not work after you broke it? > > Please explain some more. > > > <snip> >> >> httpd_accel_host virtual >> > > Squid 2.5 config. Please upgrade your software. > > 1) We have not supported 2.5 since more than 3 years now. > > 2) reverse proxy is quite difficult in that version. > > > > Amos > -- > Please be using > Current Stable Squid 2.7.STABLE9 or 3.1.1 >