Hi,
I am following http://wiki.squid-cache.org/Features/Tproxy4 strictly
but failed to configure with CISCO router & WCCP2.
My setup as follow:
Clients PCs>-----------------------------[Core
switch]-------->>-----------[Edge CISCO Router with
WCCP2]--------------->Internet
||
[Squid 3.1.10 with Fedora 14, iptables, tproxy]
I can't configure Cisco router with following configuration as there
is no other interface there (only two, one connected with core
internal switch and rest with internet.
Please help me.
=============================
interface GigabitEthernet0/3.100
description ADSL customers
encapsulation dot1Q 502
ip address x.x.x.x y.y.y.y
ip wccp 80 redirect in
ip wccp 90 redirect out
interface GigabitEthernet0/3.101
description Dialup customers
encapsulation dot1Q 502
ip address x.x.x.x y.y.y.y
ip wccp 80 redirect in
ip wccp 90 redirect out
interface GigabitEthernet0/3.102
description proxy servers
encapsulation dot1Q 506
ip address x.x.x.x y.y.y.y
ip wccp redirect exclude in
=====================
Another question, how do check gre is configured at Linux?
BR,
Azhar Chowdhury
