On 26/11/2011 1:53 a.m., alexatull wrote:
Well, managed to get squid running in SMP mode
Short answer was I'd copied stuff from by 3.1.16 production service and was
explicitly specifying ip addresses and ports to listen on. So ...
http_port 150.237.85.249:3128
http_port 150.237.84.13:3128
Resulted in no IP address being listened on when running in SMP mode but did
if I fire up squid with -N arg. ( netstat -a showed squid listening on above
IPv4 addresses)
Strange. That should not matter any more for SMP workers, they share
listening ports.
setting http_port 3128 however caused squid to listen on an IPv6 address and
everything fired up and I could run squid in SMP mode.
I suspect that had more to do with the absence of a specific address
than IPv6 specifically.
Can you verify that please?
[
What I actually ended up doing was
1). Remove kernel option that disabled IPv6 and rebooted machine
2). Rebuilt squid having removed --disable-ipv6
3). Changed cache effective user to locally created "squid" user instead of
the default of nobody ( this made a big difference to things actually
running)
4). Started from scratch with supplied squid sample config file ad stepped
through things till it broke.
Amos
