hi Yes I have a few http_access rules in my squid.conf (7 to be precise), but I can't fold this ACL into the other ACLs I have (I would have done it if I could).
TIA Paolo On Fri, Feb 17, 2012 at 9:55 AM, Matus UHLAR - fantomas <uh...@fantomas.sk> wrote: > On 16.02.12 15:51, Paolo Supino wrote: >> >> I have the following scenario: I have a subnet that needs to get out >> on the internet to 2 different subnets. To subnet1 it needs to be able >> to access only in HTTP while to subnet2 it needs to be able to access >> only in HTTPS. Is it possible to do the follwoing: >> >> acl source_subnet src 192.168.100.0/255.255.255.0 >> acl destination_subnet1 dst 172.16.0.0/255.255.0.0 >> acl destination_subnet2 dst 172.31.0.0/255.255.0.0 >> acl HTTP_PORT port 80 >> acl SSL_PORT port 443 >> >> http_access allow source_subnet destination_subnet1 HTTP_PORT >> http_access allow source_subnet destination_subnet2 SSL_PORT > > > do you have any other http_access directives in the config? > > -- > Matus UHLAR - fantomas, uh...@fantomas.sk ; http://www.fantomas.sk/ > Warning: I wish NOT to receive e-mail advertising to this address. > Varovanie: na tuto adresu chcem NEDOSTAVAT akukolvek reklamnu postu. > WinError #99999: Out of error messages.
