Well! I have tried every mentioned method and still getting the same old error...!
----- Original Message ----- > From: Warren Baker <war...@decoy.co.za> > To: Anonymous <eletters_m...@yahoo.com> > Cc: Amos Jeffries <squ...@treenet.co.nz>; "squid-users@squid-cache.org" > <squid-users@squid-cache.org>; Squid Developers <squid-...@squid-cache.org> > Sent: Monday, July 23, 2012 1:00 PM > Subject: Re: [squid-users] Fw: [ERROR] commonUfsDirOpenSwapLog: Failed to > open swap log > > On Mon, Jul 23, 2012 at 8:02 AM, Anonymous <eletters_m...@yahoo.com> > wrote: >> squid_enable"YES" > > If you installed Squid from ports then you will have a file called > /usr/local/etc/rc.d/squid - which is the startup file. You can get the > startup variables from this file by executing it and passing the > option rcvar. > > # /usr/local/etc/rc.d/squid rcvar > # squid > # > squid_enable="NO" > # (default: "") > > it should return what the startup variable is and what it's value it. > In your configured setting, above, you are missing the '=' sign. So > set it to squid_enable="YES" and remove any of your other additional > references to squid. > > -- > .warren >