Mine work with only one interface (actually two, because we use teaming ethernet card for backup in case of failure of one of them), what's the problem ???
Jérôme VERNET BELAMBRA HOLDING Responsable Réseaux et Télécoms 01 77 70 93 56 - 06 87 75 72 07 -----Message d'origine----- De : Squidblacklist [mailto:webmas...@squidblacklist.org] Envoyé : jeudi 25 avril 2013 09:30 À : squid-users@squid-cache.org Objet : Re: [squid-users] running squid by only one eth On Thu, 25 Apr 2013 00:01:05 -0700 "ma~sha" <sspard...@gmail.com> wrote: > Hi all, > Is it possible to run squid by only one eth, for example eth0 only? If > this is possible how do I do it? > thx > Of course you can "run squid with one interface" you just wont have any uplink/internet. If you are going to do this, one way would be the obvious that you need to setup vlans for multiple addresses on your single interface. However, this will likely require a switch that supports vlans via serveral available options. Its clearly going to be easier, in my mind, to simply add another interface to your machine if those resources & options are not available to you. Perhaps someone else has insight into other options. - Signed, Fix Nichols http://www.squidblacklist.org
