>> Peter: >> Do you mean you've patched the source code, and if so, how do I get >> that patch? Do I have to move from the stable trunk?
> Amos: > Sorry yes that is what I meant and it can now be found here: > http://www.squid-cache.org/Versions/v3/3.HEAD/changesets/squid-3-12957.patch > It should apply on the stable 3.3 easily, although I have not tested that. > NP: if you rebuild please go with the 3.3.8 security update release. I have patched the file as documented, and recompiled with the 3.3.8 branch >> Peter: >> The first log occurences are: >> 2013/07/23 08:26:13 kid2| Attempt to open socket for EUI retrieval failed: >> (24) Too many open files >> 2013/07/23 08:26:13 kid2| comm_open: socket failure: (24) Too many >> open files >> 2013/07/23 08:26:13 kid2| Reserved FD adjusted from 100 to 15394 due >> to failures > Amos: > So this worker #2 got errors after reaching about 990 open FD (16K - 15394). Ouch. > Note that all these socket opening operations are failing with the "Too many open files" error the OS sends back when limiting Squid to 990 or so FD. This has confirmed that Squid is not mis-calculating > where its limit is, but something in the OS is actually causing it to limit the worker. The first one to hit was a socket, but also a disk file access is getting them soon after so it is likely the global OS limit > rather than a particular FD type limit. That 990 usable FD is also suspiciously close to 1024 with a few % held spare for emergency use (as Squid does when calculating its reservation value). Amos, I don't understand how you deduced the 990 open FD from the error messages above ( "adjusted from 100 to 15394")? I would have deduced that there was some internal limit of 100 (not 1000) FD's, and that squid was re-adjusting to the maximum currently allowed (16K)? Where is my logic wrong, or what other information led to your conclusion? It is important for me to understand, as I think I have addressed the maximum file descriptors: /etc/security/limits.conf includes: # - Increase file descriptor limits for Squid * soft nofile 65536 * hard nofile 65536 root soft nofile 65536 root hard nofile 65536 /etc/pam.d/common-session* includes: # Squid requires this change to increase limit of file descriptors session required pam_limits.so After a reboot, if I login as root or squid, "ulimit -Sn" gives 65536 I included the following options to my squid ./configure script: ./configure \ --prefix=/usr \ --localstatedir=/var \ --libexecdir=${prefix}/lib/squid \ --srcdir=. \ --datadir=${prefix}/share/squid \ --sysconfdir=/etc/squid \ --with-default-user=proxy \ --with-logdir=/var/log \ --with-pidfile=/var/run/squid.pid \ --enable-snmp \ --enable-storeio=aufs,ufs \ --enable-async-io \ --with-maxfd=65536 \ --with-filedescriptors=65536 \ --enable-linux-netfilter \ --enable-wccpv2 Here is the output of mgr:info a short while after starting up again: HTTP/1.1 200 OK Server: squid/3.3.8 Mime-Version: 1.0 Date: Sun, 28 Jul 2013 06:16:09 GMT Content-Type: text/plain Expires: Sun, 28 Jul 2013 06:16:09 GMT Last-Modified: Sun, 28 Jul 2013 06:16:09 GMT Connection: close Squid Object Cache: Version 3.3.8 Start Time: Sun, 28 Jul 2013 06:14:31 GMT Current Time: Sun, 28 Jul 2013 06:16:09 GMT Connection information for squid: Number of clients accessing cache: 20 Number of HTTP requests received: 1772 Number of ICP messages received: 0 Number of ICP messages sent: 0 Number of queued ICP replies: 0 Number of HTCP messages received: 0 Number of HTCP messages sent: 0 Request failure ratio: 0.00 Average HTTP requests per minute since start: 1078.8 Average ICP messages per minute since start: 0.0 Select loop called: 598022 times, 1.093 ms avg Cache information for squid: Hits as % of all requests: 5min: 1.6%, 60min: 1.6% Hits as % of bytes sent: 5min: 0.2%, 60min: 0.2% Memory hits as % of hit requests: 5min: 37.0%, 60min: 37.0% Disk hits as % of hit requests: 5min: 27.8%, 60min: 27.8% Storage Swap size: 72074368 KB Storage Swap capacity: 2.9% used, 97.1% free Storage Mem size: 8640 KB Storage Mem capacity: 3.3% used, 96.7% free Mean Object Size: 22.30 KB Requests given to unlinkd: 0 Median Service Times (seconds) 5 min 60 min: HTTP Requests (All): 0.47928 0.47928 Cache Misses: 0.48649 0.48649 Cache Hits: 0.02796 0.02796 Near Hits: 0.00000 0.00000 Not-Modified Replies: 0.00000 0.00000 DNS Lookups: 0.16304 0.16304 ICP Queries: 0.00000 0.00000 Resource usage for squid: UP Time: 98.555 seconds CPU Time: 11.945 seconds CPU Usage: 12.12% CPU Usage, 5 minute avg: 16.44% CPU Usage, 60 minute avg: 16.44% Process Data Segment Size via sbrk(): 594624 KB Maximum Resident Size: 3144976 KB Page faults with physical i/o: 0 Memory usage for squid via mallinfo(): Total space in arena: 595416 KB Ordinary blocks: 594314 KB 619 blks Small blocks: 0 KB 0 blks Holding blocks: 307784 KB 50 blks Free Small blocks: 0 KB Free Ordinary blocks: 1102 KB Total in use: 1102 KB 0% Total free: 1102 KB 0% Total size: 903200 KB Memory accounted for: Total accounted: 467181 KB 52% memPool accounted: 467181 KB 52% memPool unaccounted: 436019 KB 48% memPoolAlloc calls: 6905819 memPoolFree calls: 6911935 File descriptor usage for squid: Maximum number of file descriptors: 393216 Largest file desc currently in use: 501 Number of file desc currently in use: 850 Files queued for open: 0 Available number of file descriptors: 392366 Reserved number of file descriptors: 600 Store Disk files open: 2 Internal Data Structures: 3233010 StoreEntries 352 StoreEntries with MemObjects 270 Hot Object Cache Items 3232658 on-disk objects Can anyone see any problems, before I expand the affected ip ranges to allow the full client load?
