On 29/08/2013 10:38 a.m., Matthew Ceroni wrote:
Hi:
I recently tried to update to the latest squid (3.8.1) from (3.1.1
that is available in CentOS). On secondary proxy servers that had no
cache, upgrading went fine.
However on the main physical proxy that has cache drives configured
squid said it started up (port was listening) but would not service
any requests. I noted in the cache.log file a reference to bug 3441
and something about rebuilding the cache.
Is there an upgrade process I have to do on the cache? Again, squid
appeared to be listening but did not service any requets.
Squid is doing the cache format upgrade automatically. The process is a
disk scan identical to if the swap.state journal was corrupted or
missing. It may take some time if you have large cache_dir.
As a workaround you can run squid as a proxy-only for the production
traffic (like your secondary one) and run another with a dummy config
file to do the cache rebuild "offline". Then swap back to normal
configuration with cache when the rebuild has finished.
Amos
