well , look , \ if u read cisco documents , u have many methods to do that ,
but i will guide u a method that we use services and acls that specify the ips that we want them to be redirected . okay :) so , assume our squid is listening to services number 30 & 40 in squid.conf . so we have on our router as below : we have to create 2 access lists , one match our clients ip when they enter the router interface and one match them when our clients return from internet and be returned into squid 1- create an acl that match the src ips of ur clients and destination port is www so we have to write : ip access-list ex ahmad1 permit tcp x.x.x.x x.x.x.x any eq www 2- create acl that match ips of clients when return from internet ip access-list ex ahmad2 permit tcp any eq www x.x.x.x x.x.x.x note that x.x.x.x is the ip and wild card mask if ur subnet clients . ========================================= 2- now after creating the acl , we add to cisco router #ip wccp 30 redirect-list ahmad1 #ip wccp 40 redirect-list ahmad2 =========================================== 3- then under the interface of cisco router that is close to switch , we have #ip wccp 30 redirect in and under interface close to internet we have #ip wccp 40 redirect in ================================================ thats it !!! if u want to redirect https traffic , u just modify acl except www to 443 ----- Dr.x -- View this message in context: http://squid-web-proxy-cache.1019090.n4.nabble.com/forced-http-and-https-traffic-redirect-to-proxy-by-cisco-router-tp4661542p4662451.html Sent from the Squid - Users mailing list archive at Nabble.com.