On Sat, 14 Jul 2001, Bill wrote:
> I've tried to build the newest sqwebmail devel version (20010620) under
> FreeBSD 4.3-RELEASE. Following the documentation to a "T", here's what
> I did.
>
> 1. tar zxf sqwebmail-2.1.1.20010620.tar.gz
> 2. cd sqwebmail-2.1.1.20010620
> 3. cat > authlib/changeuidgid.c
> void authchangegroup() {}
> void authchangeuidgid() {}
> void authchangeusername() {}
> 4. ./configure \
> --enable-webpass=vpopmail \
> --enable-https \
> --disable-utf7-folder-encoding \
> --enable-maxpurge=30 --enable-autopurge=5 \
> --without-authpwd \
> --without-authdaemon \
> --without-authshadow \
> --without-authpam \
> --without-authuserdb \
> --without-authldap \
> --with-authvchkpw \
> --with-spell=/usr/local/bin/ispell \
> --enable-cgibindir=/www/sqwebmail/cgi \
> --enable-htmllibdir=/www/sqwebmail/html \
> --enable-imagedir=/www/sqwebmail/images \
> --prefix=/www/sqwebmail \
> --enable-hardtimeout=10800 --enable-softtimeout=1800 \
> --with-maxargsize=5120000 --with-maxformargsize=20480000 \
> --with-cachedir=/var/sqwebmail --with-cacheowner=vpopmail \
> --enable-imageurl=/images
I just grabbed the current snap and gpg1.0.6.
I used the same configure options as you did above, minus the vpopmail and
authvckpw bits (I don't have them).
It built fine for me.
I don't know what to tell you as far as debugging goes. Good luck.
Perhaps try an optionless "./configure; gmake", just for testing? (it may
need the imageurl, but nothing more).
Also try the released version instead of a snapshot. Any differences?
--
Charlie Watts
[EMAIL PROTECTED] Frontier Internet
Systems Janitor and Network Plumber http://www.frontier.net/
