Module: sip-router
Branch: master
Commit: 5004a60ad8a9cd47a2c6a7fc6eae82c1b371f92a
URL:
http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=5004a60ad8a9cd47a2c6a7fc6eae82c1b371f92a
Author: Ovidiu Sas <o...@voipembedded.com>
Committer: Ovidiu Sas <o...@voipembedded.com>
Date: Tue Aug 17 13:10:33 2010 -0400
modules_k:rtpproxy - remove trailing whitespaces from documentation
---
modules_k/rtpproxy/doc/nathelper_admin.xml | 60 ++++++++++++++--------------
1 files changed, 30 insertions(+), 30 deletions(-)
diff --git a/modules_k/rtpproxy/doc/nathelper_admin.xml
b/modules_k/rtpproxy/doc/nathelper_admin.xml
index d50665a..671dff1 100644
--- a/modules_k/rtpproxy/doc/nathelper_admin.xml
+++ b/modules_k/rtpproxy/doc/nathelper_admin.xml
@@ -21,7 +21,7 @@
via an rtpproxy.
</para>
<para>
- Known devices that get along over &nat;s with rtpproxy are ATAs
+ Known devices that get along over &nat;s with rtpproxy are ATAs
(as clients) and Cisco Gateways (since 12.2(T)) as servers.
See <ulink
url="http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a0080110bf9.html";>
http://www.cisco.com/en/US/products/sw/iosswrel/ps1839/products_feature_guide09186a0080110bf9.html";></ulink>
@@ -35,10 +35,10 @@
balancing/distribution and control/selection purposes.
</para>
<para>
- The module allows the definition of several sets of rtpproxies
-
+ The module allows the definition of several sets of rtpproxies -
load-balancing will be performed over a set and the user has the
ability to choose what set should be used. The set is selected
via
- its id - the id being defined along with the set. Refer to the
+ its id - the id being defined along with the set. Refer to the
<quote>rtpproxy_sock</quote> module parameter definition for
syntax
description.
</para>
@@ -47,13 +47,13 @@
the weight of each rtpproxy from the set.
</para>
<para>
- The selection of the set is done from script prior using
+ The selection of the set is done from script prior using
[un]force_rtp_proxy(), rtpproxy_offer() or rtpproxy_answer()
functions - see the set_rtp_proxy_set() function.
</para>
<para>
- For backward compatibility reasons, a set with no id take by
default
- the id 0. Also if no set is explicitly set before
+ For backward compatibility reasons, a set with no id take by
default
+ the id 0. Also if no set is explicitly set before
[un]force_rtp_proxy(), rtpproxy_offer() or rtpproxy_answer()
the 0 id set will be used.
</para>
@@ -81,7 +81,7 @@
<section>
<title>External Libraries or Applications</title>
<para>
- The following libraries or applications must be installed
before
+ The following libraries or applications must be installed before
running &kamailio; with this module loaded:
<itemizedlist>
<listitem>
@@ -99,7 +99,7 @@
<section>
<title><varname>rtpproxy_sock</varname> (string)</title>
<para>
- Definition of socket(s) used to connect to (a set) RTPProxy. It
may
+ Definition of socket(s) used to connect to (a set) RTPProxy. It
may
specify a UNIX socket or an IPv4/IPv6 UDP socket.
</para>
<para>
@@ -129,7 +129,7 @@ modparam("rtpproxy", "rtpproxy_sock",
<title><varname>rtpproxy_disable_tout</varname>
(integer)</title>
<para>
Once RTPProxy was found unreachable and marked as disable,
rtpproxy
- will not attempt to establish communication to RTPProxy for
+ will not attempt to establish communication to RTPProxy for
rtpproxy_disable_tout seconds.
</para>
<para>
@@ -241,12 +241,12 @@ modparam("rtpproxy", "nortpproxy_str",
"a=sdpmangled:yes\r\n")
<function moreinfo="none">set_rtp_proxy_set()</function>
</title>
<para>
- Sets the Id of the rtpproxy set to be used for the next
+ Sets the Id of the rtpproxy set to be used for the next
[un]force_rtp_proxy(), rtpproxy_offer() or rtpproxy_answer()
command.
</para>
<para>
- This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE,
+ This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE,
BRANCH_ROUTE.
</para>
<example>
@@ -264,7 +264,7 @@ force_rtp_proxy();
<function moreinfo="none">force_rtp_proxy([flags [,
ip_address]])</function>
</title>
<para>
- Rewrites &sdp; body to ensure that media is passed through
+ Rewrites &sdp; body to ensure that media is passed through
an &rtp; proxy. It can have optional parameters to force
additional
features. If ip_address is provided, it will be used to replace
the
one in SDP.
@@ -298,7 +298,7 @@ force_rtp_proxy();
</para></listitem>
<listitem><para>
<emphasis>l</emphasis> - force
<quote>lookup</quote>, that is,
- only rewrite SDP when corresponding session is
already exists
+ only rewrite SDP when corresponding session is
already exists
in the RTP proxy. By default is on when the
session is to be
completed (reply in non-swap or ACK in swap
mode).
</para></listitem>
@@ -318,29 +318,29 @@ force_rtp_proxy();
the 'w' flag for clients behind NAT! See also
above notes!
</para></listitem>
<listitem><para>
- <emphasis>f</emphasis> - instructs rtpproxy to
ignore marks
- inserted by another rtpproxy in transit to
indicate that the
- session is already goes through another proxy.
Allows creating
+ <emphasis>f</emphasis> - instructs rtpproxy to
ignore marks
+ inserted by another rtpproxy in transit to
indicate that the
+ session is already goes through another proxy.
Allows creating
chain of proxies.
</para></listitem>
<listitem><para>
- <emphasis>r</emphasis> - flags that IP address
in SDP should
- be trusted. Without this flag, rtpproxy ignores
address in
- the SDP and uses source address of the SIP
message as media
+ <emphasis>r</emphasis> - flags that IP address
in SDP should
+ be trusted. Without this flag, rtpproxy ignores
address in
+ the SDP and uses source address of the SIP
message as media
address which is passed to the RTP proxy.
</para></listitem>
<listitem><para>
- <emphasis>o</emphasis> - flags that IP from the
origin
+ <emphasis>o</emphasis> - flags that IP from the
origin
description (o=) should be also changed.
</para></listitem>
<listitem><para>
- <emphasis>c</emphasis> - flags to change the
session-level
- SDP connection (c=) IP if media-description
also includes
+ <emphasis>c</emphasis> - flags to change the
session-level
+ SDP connection (c=) IP if media-description
also includes
connection information.
</para></listitem>
<listitem><para>
- <emphasis>s</emphasis> - flags to swap creation
with
- confirmation between requests and replies. By
default, a
+ <emphasis>s</emphasis> - flags to swap creation
with
+ confirmation between requests and replies. By
default, a
request creates the RTP session and a reply
confirms it. If
swapped, a reply will create the RTP session
and a request
will confirm it. The flag is considered
depreciated and
@@ -348,7 +348,7 @@ force_rtp_proxy();
rtpproxy_offer() or rtpproxy_answer() instead.
</para></listitem>
<listitem><para>
- <emphasis>w</emphasis> - flags that for the UA
from which
+ <emphasis>w</emphasis> - flags that for the UA
from which
message is received, support symmetric RTP must
be forced.
</para></listitem>
<listitem><para>
@@ -371,7 +371,7 @@ force_rtp_proxy();
</para></listitem>
</itemizedlist>
<para>
- This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE,
+ This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE,
FAILURE_ROUTE, BRANCH_ROUTE.
</para>
<example>
@@ -568,7 +568,7 @@ unforce_rtp_proxy();
<function moreinfo="none">start_recording()</function>
</title>
<para>
- This command will send a signal to the RTP-Proxy to record
+ This command will send a signal to the RTP-Proxy to record
the RTP stream on the RTP-Proxy.
</para>
<para>
@@ -600,7 +600,7 @@ start_recording();
Disables it if a zero value is given.
</para>
<para>
- The first parameter is the rtp proxy url (exactly as
defined in
+ The first parameter is the rtp proxy url (exactly as
defined in
the config file).
</para>
<para>
@@ -624,7 +624,7 @@ $ &ctltool; fifo nh_enable_rtpp udp:192.168.2.133:8081 0
<section>
<title><function
moreinfo="none">nh_show_rtpp</function></title>
<para>
- Displays all the rtp proxies and their information: set
and
+ Displays all the rtp proxies and their information: set
and
status (disabled or not, weight and recheck_ticks).
</para>
<para>
@@ -635,7 +635,7 @@ $ &ctltool; fifo nh_enable_rtpp udp:192.168.2.133:8081 0
<function
moreinfo="none">nh_show_rtpp</function> usage</title>
<programlisting format="linespecific">
...
-$ &ctltool; fifo nh_show_rtpp
+$ &ctltool; fifo nh_show_rtpp
...
</programlisting>
</example>
_______________________________________________
sr-dev mailing list
sr-dev@lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
