Hi list!
I'm using kamailio 4.2 for load-balancing and failover via dispatcher,
but I'm having some NAT related issues and I was hoping that someone
might point me in the right direction.
My setup is the following:
PSTN - PBX - kamailio - NAT - client
Calls from the NATed client to PSTN and/or PBX features (e.g. voicemail)
work just fine.
However, when a call comes from PSTN to the client, kamailio sends the
INVITE to the client's RFC1918 IP and I can't figure out how to send it
to the correct destination. I tried loading the registrar and usrloc
modules and used save("location") during REGISTER and lookup("location")
just before loose_route(), but the end result was that kamailio replied
to REGISTERs with any username/password with a 200 OK and the endpoints
never registered with the PBX.
I can attach the config file if that will help.
Thanks for all input in advance!
Regards,
Iskren
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users