The sound is strange, Actually the host-IP-Addres should not be missed in new version because it is mandatory option, I guess it would be nice to check it with latest version again. With Regards. Mojtaba
On Wed, Mar 13, 2019 at 2:07 PM Pavel S <paf...@gmail.com> wrote: > Hello Mojtava, > > > Did you use FHOSS or IMS_DIAMETER_SERVER module? > No, I am using our own hss server. > > >Anyway what mandatory parameters do you mean exactly? > According to RFC6733 section 5.3.1 - > https://tools.ietf.org/html/rfc6733#section-5.3.1 > > The Capabilities-Exchange-Request (CER), indicated by the Command > Code set to 257 and the Command Flags' 'R' bit set, is sent to > exchange local capabilities. Upon detection of a transport failure, > this message MUST NOT be sent to an alternate peer. > > When Diameter is run over SCTP [RFC4960] or DTLS/SCTP [RFC6083], > which allow for connections to span multiple interfaces and multiple > IP addresses, the Capabilities-Exchange-Request message MUST contain > one Host-IP-Address AVP for each potential IP address that MAY be > locally used when transmitting Diameter messages. > > Message Format > > <CER> ::= < Diameter Header: 257, REQ > > { Origin-Host } > { Origin-Realm } > 1* { Host-IP-Address } > { Vendor-Id } > { Product-Name } > [ Origin-State-Id ] > * [ Supported-Vendor-Id ] > * [ Auth-Application-Id ] > * [ Inband-Security-Id ] > * [ Acct-Application-Id ] > * [ Vendor-Specific-Application-Id ] > [ Firmware-Revision ] > * [ AVP ] > > Kamailio 5.1 with loaded cdp, cdr_avp, ims_icsf modules and default > configuration described here > https://github.com/kamailio/kamailio/tree/master/misc/examples/ims/icscf > sends Host-IP-Address but Kamailio 5.2 with the same configuration doesn't. > > Any idea how to fix it? > > Regards, > > Pavel Siderov > > > >Hello, > >The CER/CEA messages are used just for connections between two peers > >diameter interface. Did you use FHOSS or IMS_DIAMETER_SERVER module? In > >both cases, you should not have any issue. Anyway what mandatory parameters > >do you mean exactly? > >WIth Best Regards. Mojtava > ><https://www.kamailio.org/docs/modules/5.1.x/modules/ims_diameter_server.html> > > >On Tue, Mar 12, 2019 at 8:17 PM Pafel <pafels at gmail.com > ><https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>> wrote: > > > >>* Hello, > *>>>>* I am testing ims setup with kamailio 5.2 using the default > configuration > *>>* provided here: > *>>* https://github.com/kamailio/kamailio/tree/master/misc/examples/ims/ > <https://github.com/kamailio/kamailio/tree/master/misc/examples/ims/> . > *>>* Đ¢here is an issue I am facing with cdp avp in request sent to hss. There > *>>* are some missing mandatory parameters in capabilities exchange request > like > *>*> 257 host-ip-address for example. Any idea how to add it via icscf.xml or > *>*> kamailio.cfg ? The same parameter is passed to hss with kamailio 5.1 > using > *>*> default ims configuration. I read cdp and cdp_avp documentation but > *>*> couldn't understand if it is possible to add it. > *>>>>* Regards, > *>>* Pavel Siderov > *>>* _______________________________________________ > *>>* Kamailio (SER) - Users Mailing List > *>>* sr-users at lists.kamailio.org > <https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users> > *>*> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > <https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users> > *>> > > _______________________________________________ > Kamailio (SER) - Users Mailing List > sr-users@lists.kamailio.org > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > -- --Mojtaba Esfandiari.S
_______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users