Hello,
i was working on a similar problem. I followed the acc-dialog -> (r)syslog
approach.
In rsyslog I piped the message to a script, which appends the message as a
xml-record to a file in "/var/log/kamailio-call.log“.
(This script might be useful for you to adapt to your needs.)
module(load="omprog“)
local6.* action(type="omprog" binary="/etc/rsyslog-cdr-script.sh")
and my script looks like
#! /bin/ash
Log=/var/log/kamailio-call.log
read fromstdin;
while read fromstdin; do
echo $fromstdin | sed -e "s/^[^;]* \(.*=\)/\1/" -e
"s/\(time=[0-9]*\)\.[0-9]*/\1/g" -e "s/\([^=;]*\)=\([^;]*\(;[^
][^=]*=[^;]*\)*\); / <\1>\2<\/\1>; /g" -e "s/ \([^=;]*\)=\([^;]*\(;[^
][^=]*=[^;]*\)*\)$/ <\1>\2<\/\1>/" | awk 'BEGIN {FS=";"; printf "<call>"} { i =
1; while(i < NF){if(index($i,"time>")>0) { time_value = $i;
gsub("<[^>]*>","",time_value); sub(">[^<]*", strftime(">%Y-%m-%dT%H:%M:%S",
time_value), $i); } printf $i; i = i+1;} } END {print "</call>"}' >> $Log
done
Here a little explanation that might be helpful to understand the commands:
The sed-command
*) removes the front syslog-stuff
*) trunks all the post dot digit from any entry that names ends with „time" and
*) converts it to xml-syntax (one extra for the last entry)
The awk command converts the (trunked) timestamps into a "human-readable“
format and adds the enclosing „call“ syntax.
(If you exactly know what your syslog entry syntax is, you might simplify the
script statements a lot … )
I hope this helps a little.
Regards
Jan-Hendrik
> Am 07.04.2019 um 12:42 schrieb Henning Westerholt <h...@skalatan.de>:
>
> Hello,
>
> some starting points:
>
> - use dlg_manage() or set a dialog flag in the cfg to start dialog tracking
>
> - setup the dialog event routes (section 11 in README) and put your
> logging logic there
>
> Best regards,
>
> Henning
>
> Am 06.04.19 um 11:29 schrieb Yu Boot:
>> How to make something on dialog event? Just can't figure it out after
>> reading module docs :(
>>
>>
>> 06.04.2019 2:09, David Villasmil пишет:
>>> You can always export the cdr table periodically.
>>> Take a look at siremis. And when the trigger fires every 5 minutes to
>>> create the cdrs, just export them.
>>>
>>>
>>> Also, as it’s been said, you can use the dialog and when the call
>>> ends gather all the info and just print it out. You can direct it to
>>> rsyslog to save it anywhere you want.
>>>
>>
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users@lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
> --
> Henning Westerholt - https://skalatan.de/blog/
> Kamailio services - https://skalatan.de/services
>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users@lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
