You are facing the problem the wrong way.
For working with softphones, that must be "wake up", your logic must be like
this:
...
if request goes to a push_client:
hold_request()
send_push_notification()
endif
...
if request(REGISTER) and client is marked as push_client:
if holded_requests():
unhold_request():
endif
endif
...
All the workflow with push_clients, does nothing to do with SST or any other
timer
From: "Anuran Barman" <anuranbar...@gmail.com>
To: "Patrick Wakano" <pwak...@gmail.com>
Cc: "Kamailio (SER) - Users Mailing List" <sr-users@lists.kamailio.org>
Sent: Wednesday, December 18, 2019 6:30:16 AM
Subject: Re: [SR-Users] How to reduce re-INVITE time in Kamailio
@ Henning Westerholt
So I loaded the sst.so module and setup the params it said to set like below:
modparam("dialog", "timeout_avp", "$avp(i:10)")
# Set the sst modules timeout_avp to be the same value
modparam("sst", "timeout_avp", "$avp(i:10)")
modparam("sst", "min_se", 10)
and also set the flag in INVITE method in request_route {}
# account only INVITEs
if (is_method("INVITE")) {
setflag(FLT_ACC); # do accounting
setflag(5);
}
and also set the t_set_retr in route {}
route {
dlg_manage();
t_set_retr(10, 0);
if (is_method("BYE")) {
$var(elapsed) = ( $Ts - $dlg(start_ts) );
xlog ("L_INFO", "Completed $dlg(from_uri) to $dlg(to_uri) -
$var(elapsed) duration");
}
}
but still I am getting the INVITE after 57-59 seconds later. How do I do this?
On Wed, Dec 18, 2019 at 9:40 AM Anuran Barman < [ mailto:anuranbar...@gmail.com
| anuranbar...@gmail.com ] > wrote:
Thank you all for the detailed information. Let me try both changing the
transmission time and also suspending the invite transaction. That NAT port
close did not hit my mind. Thanks for putting light on that.
On Wed, 18 Dec 2019 at 9:35 AM, Patrick Wakano < [ mailto:pwak...@gmail.com |
pwak...@gmail.com ] > wrote:
BQ_BEGIN
As I understood Anuran is after the SIP retransmission timer.
>From the description, I think the first INVITE, which I assume triggers the
>pushkit voip to IOS stuff, is missed, then (with default timer T1) after 500ms
>the first retransmission is done, then after another 500ms you get the 2nd,
>then after 1s the 3rd, after 2s the 4th, after 4s the 5th, after 8s the 6th
>and finally after 16s the 7th. This is probably why if you wait 10/15s it
>works, because probably the 5th or 6th retransmission hits your client. If you
>wait just 5s you can fall under one window without retransmission (if you miss
>the 5th you have to wait 8s for the next retransmission).
You can change the timer T1 in the TM module and hope the retransmissions do
the job for you. It might work but doesn't look safe to me. I have no idea how
this pushkit voip event works, but you may have problems of NAT ports being
closed due to lack of SIP activity, then the INVITE will never reach your
destination anyway.
The way to go seems what David has suggested about suspending the Invite
transaction while your client start-up and register, but I don't know details
about this....
Cheers,
Patrick Wakano
On Wed, 18 Dec 2019 at 07:34, Henning Westerholt < [ mailto:h...@skalatan.de |
h...@skalatan.de ] > wrote:
BQ_BEGIN
As mentioned, it is more a User agent related topic. But there is a module that
provide related functions in Kamailio:
[ https://kamailio.org/docs/modules/stable/modules/sst.html |
https://kamailio.org/docs/modules/stable/modules/sst.html ]
Cheers,
Henning
Am 17.12.19 um 19:51 schrieb Anuran Barman:
BQ_BEGIN
Thanks for the reply. Sharing doc links of Session timer settings related to
Kamailio specifically will be greatly appreciated.
On Wed, 18 Dec 2019 at 12:18 AM, Yuriy Gorlichenko < [
mailto:ovoshl...@gmail.com | ovoshl...@gmail.com ] > wrote:
BQ_BEGIN
Session-Expires header ( Just remembered right name) will help you
See rfc 4028
[ https://tools.ietf.org/html/rfc4028#page-6 |
https://tools.ietf.org/html/rfc4028#page-6 ]
On Tue, 17 Dec 2019, 19:44 Yuriy Gorlichenko, < [ mailto:ovoshl...@gmail.com |
ovoshl...@gmail.com ] > wrote:
BQ_BEGIN
Hi. It is no a kamailio question but sip question itself. You can manage how
often te invite will be by using session-timers. It will help you to setup time
range between reInvite ir whatever message you will use as keepalive
On Tue, 17 Dec 2019, 19:34 Anuran Barman, < [ mailto:anuranbar...@gmail.com |
anuranbar...@gmail.com ] > wrote:
BQ_BEGIN
Hi, I am using Kamailio for my SIP Phone app. My main SIP client is the iOS
app. Till now everything is working fine regarding the calling. But the problem
is when the app is killed I am not able to pick up incoming call. The thing is,
when app is killed I am sending PushKit VOIP message to my ios app to wake it
up. App is waking up. But by the time app is waking up, the original INVITE
message got missed up. So according to SIP protocol it will re-INVITE after
some time. Currently if I keep my app open for 10-15 secs after it wakes up, I
am able to get the re-INVITE and everything works fine just as it was supposed
to. But waiting 10-15 sec on the app is not practical in any sense.
So my question is there any way I can reduce the re-INVITE time to like 5/6
seconds so that as soon as the app open it will wait for 5/6 seconds (practical
upto some extent) and it will get the call ? Or what kamailio is using as the
interval time is a SIP standard and can not be changed? If possible to do so,
how can I do that? Please help.
_______________________________________________
Kamailio (SER) - Users Mailing List
[ mailto:sr-users@lists.kamailio.org | sr-users@lists.kamailio.org ]
[ https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users |
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users ]
BQ_END
_______________________________________________
Kamailio (SER) - Users Mailing List
[ mailto:sr-users@lists.kamailio.org | sr-users@lists.kamailio.org ]
[ https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users |
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users ]
BQ_END
_______________________________________________
Kamailio (SER) - Users Mailing List [ mailto:sr-users@lists.kamailio.org |
sr-users@lists.kamailio.org ] [
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users |
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users ]
BQ_END
--
Kamailio Merchandising - [ https://skalatan.de/merchandising/ |
https://skalatan.de/merchandising/ ] Kamailio services - [
https://skalatan.de/services | https://skalatan.de/services ] Henning
Westerholt - [ https://skalatan.de/blog/ | https://skalatan.de/blog/ ]
_______________________________________________
Kamailio (SER) - Users Mailing List
[ mailto:sr-users@lists.kamailio.org | sr-users@lists.kamailio.org ]
[ https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users |
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users ]
BQ_END
BQ_END
BQ_END
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
